[LAU] Very low input from accoustic guitar pickup

[Joe Hartley]

On Wed, 21 Nov 2007 20:44:48 -0500
lanas <lanas at securenet.net> wrote:
>   I'm connecting an accoustic bass guitar that has an internal pickup
> to a 1010LT card (inout 3 for instance) using a 1/4" cable and a 1/4"
> to RCA converter. 

You need some form of preamp between the guitar and the 1010.  The guitar
does not provide a strong enough signal for the 1010 to handle properly.
An inexpensive mixer will do the trick.

-- 
======================================================================
       Joe Hartley - UNIX/network Consultant - jh at brainiac.com
Without deviation from the norm, "progress" is not possible. - FZappa