[LAU] Problems with Delta1010

[Kevin Cosgrove]

On 12 April 2008 at 13:23, Joe Hartley <jh at brainiac.com> wrote:

> Thomas, if you don't, it's quite possible someone with a bit of experience
> with a soldering iron can fix.  I am writing up a website on it, but have
> not completed it pending some work with the pix I took.  
> 
> There's a lot of stuff that's searchable on the 1010 and capacitors.  Caps
> usually fail visibly, so look for the ones on the lower circuit board that
> might look burned or as if they'd leaked.
> 
> I've fixed 2 1010s with bad caps so far, so don't give up on the unit just
> yet!  I'll see if I can't get the photos soon to finish up that writeup, and
> the one on connecting 2 1010s together.

Pictures of the caps would be SOOOO helpful.  Thanks....
 
--
Kevin