[LAU] qsynth: errors / what a waste of time :(

[Rui Nuno Capela]

schoappied wrote:
> Rui Nuno Capela wrote:
>> On Thu, March 6, 2008 14:01, schoappied wrote:
>>  
>>> Shelagh Manton wrote:
>>>     
>> (snip)
>>  
>>> As I said, only engine 1 is not working.... You can see that in the
>>> messages displayed by qsynth.
>>>     
>> (snip)
>>  
>>> 13:38:55.455 Qsynth1: Creating audio driver (jack)...
>>> 13:38:55.581 Qsynth1: Creating MIDI router (alsa_seq)...
>>> 13:38:55.582 Qsynth1: Creating MIDI driver (alsa_seq)...
>>> *13:38:55.615 Qsynth1: Failed to create the MIDI driver (alsa_seq). No
>>> MIDI input will be available.
>>> JACK tmpdir identified as [/dev/shm]
>>> ALSA lib seq.c:935:(snd_seq_open_noupdate) Unknown SEQ snd-seq
>>> fluidsynth: error: Error opening ALSA sequencer*
>>>     
>>
>> while in your qsynth1 engine setup/midi, is there anything legible in the
>> midi device name box? even though its greyed out?
>>
>> if it is, make it blank. aha
>>
>> btw, which qsynth version is this? don't get me started :) i'll suggest
>> you upgrate to the current maintained level (0.3.2) as this has already
>> been cleaned out, probably ;)
>>
>> byee
>>   
> I can remove that greyed out line... But at all the new starts of qsynth
> it is back.....
> 
> I want to remove it forever...!

probably you'll need to select the alsa_raw midi driver, then erase the
midi device and then put the former back to alsa_seq

byee
-- 
rncbc aka Rui Nuno Capela
rncbc at rncbc.org