[LAU] LinuxSampler and SFZ

[Christopher Cherrett]

-------- Original Message  --------
Subject: Re: [LAU] LinuxSampler and SFZ
From: Leigh Dyer <lsd at wootangent.net>
To: linux-audio-user at lists.linuxaudio.org
Date: 04/29/2011 04:11 PM
> On 30/04/11 07:51, S. Massy wrote:
>> Hello,
>>
>> Today, I built linuxsampler from CVS in order to be able to use the SFZ
>> engine; however, when I do:
>> LOAD ENGINE SFZ 0
>> SET CHANNEL AUDIO_OUTPUT_DEVICE 0 0
>>
>> LinuxSampler segfaults. Has any one had any success using linuxsampler
>> together with SFZ, ir is it still very much under development at this
>> point?
>
> I've used it quite a bit, but I did find in the past (though less so 
> now) that it's a bit particular about the order in which things are 
> done. It could be that it's now happy enough with files generated by 
> its GUIs (I use Fantasia, and haven't run in to these problems for a 
> while), but that it's still not entirely robust when given commands in 
> a different order to what it's expecting.
>
> I've attached a sample .lscp file that I've been using a lot -- it was 
> generated in Fantasia, and loads 10 copies of the same SFZ drum kit. 
> Hopefully it'll give you some pointers on how to produce a .lscp file 
> that will load successfully.
>
> Thanks
> Leigh
>
>
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user at lists.linuxaudio.org
> http://lists.linuxaudio.org/listinfo/linux-audio-user
Try running from the command line with your lscp and not using fantasia.

I find fantasia is what is crashing a lot.

Thanks!

-- 
Christopher Cherrett
ccherrett at openoctave.org
http://www.openoctave.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxaudio.org/pipermail/linux-audio-user/attachments/20110429/3a5b054b/attachment.htm>