[LAU] netjack beginner question

[rosea grammostola]

On 08/14/2011 11:00 PM, Joe Hartley wrote:
> On Sun, 14 Aug 2011 22:10:51 +0200
> rosea grammostola<rosea.grammostola at gmail.com>  wrote:
>
>> On 08/14/2011 09:59 PM, Julien Claassen wrote:
>>> Rosea!
>>>    How do you reach your slave computer from the master computer, say
>>> by ping or ssh? That adress is the slave host. It's simple networking
>>> stuff.
>> People told me that it's not possible to use openssh over a crossover
>> cable...
> You shouldn't listen to those people - I do it all the time.
>
>> It's no simple networking stuff apparently. Maybe I should
>> explore that first, how to make connection via crossover cable (without
>> JACK).
> Actually, it *is* simple networking stuff, but it sounds like you don't
> have the background for that.  You have to know how to set IP addresses
> manually, and a tiny bit about subnetting.
>
> It will be much easier to set up the second machine the way you'd set
> up any other machine, using a router that has a DHCP server to assign
> the IP address and default route, etc.  Even if for some reason you don't
> have the machines you're playing with connected to a network, it'll still
> be much easier doing this with a cheap router.
>
Should netjack work with the same performance on a wireless connection, 
compared to wired connection?

\r