[LAU] setting up hardware priority

[Renato]

On Tue, 16 Aug 2011 09:34:09 -0700 (PDT)
James Warden <warjamy at yahoo.com> wrote:

> try 'lspci -n'
> 
> J.

ok, but how do I relate this output to the "lsusb" output (posted
before) to find out which port my card is on? 

renato at acerarch ~ $ lspci -n
00:00.0 0600: 8086:27a0 (rev 03)
00:01.0 0604: 8086:27a1 (rev 03)
00:1b.0 0403: 8086:27d8 (rev 02)
00:1c.0 0604: 8086:27d0 (rev 02)
00:1c.1 0604: 8086:27d2 (rev 02)
00:1c.2 0604: 8086:27d4 (rev 02)
00:1c.3 0604: 8086:27d6 (rev 02)
00:1d.0 0c03: 8086:27c8 (rev 02)  #usb controllers are from here
00:1d.1 0c03: 8086:27c9 (rev 02)
00:1d.2 0c03: 8086:27ca (rev 02)
00:1d.3 0c03: 8086:27cb (rev 02)
00:1d.7 0c03: 8086:27cc (rev 02)  #to here
00:1e.0 0604: 8086:2448 (rev e2)
00:1f.0 0601: 8086:27b9 (rev 02)
00:1f.2 0101: 8086:27c4 (rev 02)
00:1f.3 0c05: 8086:27da (rev 02)
01:00.0 0300: 10de:01d7 (rev a1)
05:00.0 0280: 8086:4222 (rev 02)
06:01.0 0200: 14e4:170c (rev 02)
06:04.0 0607: 1524:1412 (rev 10)
06:04.1 0501: 1524:0530 (rev 01)
06:04.2 0805: 1524:0550 (rev 01)
06:04.3 0501: 1524:0520 (rev 01)
06:04.4 0501: 1524:0551 (rev 01)


cheers,
renato