[LAU] Maudio Delta 66 Not recognised on GA-Z68AP-D3
sylos
richardsill321 at btinternet.com
Sat Apr 14 10:53:33 UTC 2012
Hello all.
I havent had to post anything to such a wide variety of knowledegable
people before so forgive me if I have broken any etiquette, but I have a
pretty big problem.
I recently spent a big wad of cash building a rig based on the
GA-Z68AP-D3 motherboard. I built it primarily for audio production on
linux using my Maudio Delta 66 Rev B sound card. The card works fine
when no graphics card is installed but as soon as I install my NVIDIA
7900GTO card in the PCIex16 slot - alsa fails to see the soundcard. All
I get listed in aplay -l is my onboard sound or, if I switch off onboard
sound, no cards listed.
I have been on the Ubuntu Studio forums (this is the main OS I use for
Audio) but have been unable to get a solution.
I have tried a few options. I have tried the 3 series kernel from
upstream but that didnt help. I have tried installing the proprietary
driver for th NVIDIA card which has allowed use of Message Signalled
Interrupts but that has not helped. I have updated the BIOS version to
the current one from the manufacturers website. I am also on my second
motherboard as the first one was returned due to a defect.
I have also tested the sound card and graphics card on a friends Asus
P8Z68 Deluxe motherboard. The soundcard is detected from a live CD with
both my NVIDIA card installed and my friends ATI card. So it appears not
to be an issue of defective card.
I have also tested the set up with Ubuntu 11.10 and AV Linux. They have
the same basis so no difference.
I am pretty much out of options at this point. I dont know what to do.
Using the system with just the ondboard graphics is not ideal as the
Mobo only has HDMI out - which means I would need to buy a new monitor
as mine doesnt support HDMI.
Below is some useful output
ric at Ric:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC889 Analog [ALC889 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC889 Digital [ALC889 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
ric at Ric:~$ lspci -vvv
00:00.0 Host bridge: Intel Corporation Device 0100 (rev 09)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port
(rev 09)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f8000000-faffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 Display controller: Intel Corporation Device 0112 (rev 09)
Subsystem: Giga-byte Technology Device d000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 12
Region 0: Memory at fb800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ff00 [size=64]
Capabilities: <access denied>
00:16.0 Communication controller: Intel Corporation Cougar Point HECI
Controller #1 (rev 04)
Subsystem: Giga-byte Technology Device 1c3a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 12
Region 0: Memory at fbfff000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host
Controller #2 (rev 05) (prog-if 20)
Subsystem: Giga-byte Technology Device 5006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation Cougar Point High Definition
Audio Controller (rev 05)
Subsystem: Giga-byte Technology Device a002
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fbff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port
1 (rev b5)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: cc000000-cc1fffff
Prefetchable memory behind bridge: 00000000cc200000-00000000cc3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port
2 (rev b5)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port
3 (rev b5)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fbd00000-00000000fbdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5) (prog-if 01)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host
Controller #1 (rev 05) (prog-if 20)
Subsystem: Giga-byte Technology Device 5006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbffd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation Device 1c44 (rev 05)
Subsystem: Giga-byte Technology Device 5001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface: Intel Corporation Cougar Point 4 port SATA IDE
Controller (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Giga-byte Technology Device b002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fd00 [size=4]
Region 2: I/O ports at fc00 [size=8]
Region 3: I/O ports at fb00 [size=4]
Region 4: I/O ports at fa00 [size=16]
Region 5: I/O ports at f900 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05)
Subsystem: Giga-byte Technology Device 5001
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 10
Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel modules: i2c-i801
00:1f.5 IDE interface: Intel Corporation Cougar Point 2 port SATA IDE
Controller (rev 05) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device b002
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f700 [size=8]
Region 1: I/O ports at f600 [size=4]
Region 2: I/O ports at f500 [size=8]
Region 3: I/O ports at f400 [size=4]
Region 4: I/O ports at f300 [size=16]
Region 5: I/O ports at f200 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7900
GT/GTO] (rev a1)
Subsystem: nVidia Corporation Device 042b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f9000000 (64-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at cf00 [size=128]
[virtual] Expansion ROM at fa000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb, nouveau
03:00.0 USB Controller: Device 1b6f:7023 (rev 01) (prog-if 30)
Subsystem: Giga-byte Technology Device 5007
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbef8000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: Giga-byte Technology Device e000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at ee00 [size=256]
Region 2: Memory at fbdff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fbdf8000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8168
Kernel modules: r8168
05:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev
30) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=05, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
06:00.0 Multimedia audio controller: VIA Technologies Inc. ICE1712
[Envy24] PCI Multi-Channel I/O Controller (rev 02)
Subsystem: VIA Technologies Inc. Device d632
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at dfc0 [size=32]
Region 1: I/O ports at dff0 [size=16]
Region 2: I/O ports at dfe0 [size=16]
Region 3: I/O ports at df80 [size=64]
Capabilities: <access denied>
Kernel modules: snd-ice1712
ric at Ric:~$ cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 126 0 0 0 IO-APIC-edge timer
1: 31 0 259 18 IO-APIC-edge i8042
4: 2 0 0 0 IO-APIC-edge
7: 0 0 0 0 IO-APIC-edge
parport0
8: 1 0 0 0 IO-APIC-edge rtc0
9: 0 0 0 0 IO-APIC-fasteoi acpi
17: 0 0 0 0 IO-APIC-fasteoi
xhci_hcd:usb3
18: 244 0 0 3558 IO-APIC-fasteoi
ehci_hcd:usb1
19: 8779 0 0 0 IO-APIC-fasteoi
ata_piix, ata_piix
22: 732 0 779 0 IO-APIC-fasteoi
HDA Intel
23: 1206 0 0 0 IO-APIC-fasteoi
ehci_hcd:usb2
29: 651 10818 0 0 PCI-MSI-edge nvidia
NMI: 0 0 0 0 Non-maskable interrupts
LOC: 21411 21545 9745 7132 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 Performance
monitoring interrupts
PND: 0 0 0 0 Performance pending work
RES: 290 381 302 269 Rescheduling interrupts
CAL: 80 148 153 155 Function call interrupts
TLB: 234 380 323 277 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 2 2 2 2 Machine check polls
ERR: 0
MIS: 0
ric at Ric:~$ cat /proc/asound/cards
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xfbff8000 irq 22
ric at Ric:~$ uname -r
2.6.32-38-preempt
ric at Ric:~$ cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.21.
Again I apologise if this is the wrong place to post this but I am now
pretty desperate.
Any help will be gratefully received.
Many Thanks
More information about the Linux-audio-user
mailing list