[LAU] jack -> net driver

[Rob]

David Santamauro <david.santamauro at gmail.com> wrote:
>
>.. answering myself ...
>
>On 12/28/2013 10:26 AM, David Santamauro wrote:
>
>> Then I started the slave (same command line) and noticed massive
>xruns
>> (on the slave) -- so ... I change it all back to -p 256 but the xruns
>> are still present (on the slave).
>>
>> Poking around a bit, I opened up the "options" on the master and it
>says
>> Frames/Period: 256, I open up options on the slave, and it is grayed
>out
>> but says: Frames/Period: 512.
>>
>> My questions are simply:
>>
>> 1) is qjackctl reporting this correctly on the slave?
>
>No, qjackctl is displaying some old values, opening up the Messages 
>window -> Status tab shows the correct value (256)
>
>> 3) is this why I'm seeing massive xruns?
>
>nope ... while looking at the Status tab I noticed DSP load was between
>
>95% and 100%. I found the offending windows program and all is well
>again


Out of curiosity what software are you running on each OS?

Rob