[LAU] HDSP wrong firmware gets loaded (digi- vs multiface)

[Peter P.]

* Jörn Nettingsmeier <nettings at stackingdwarves.net> [2014-02-01 15:37]:
> On 02/01/2014 01:00 AM, Peter P. wrote:
> >Hi list,
> >
> >hdsploader (via hotplug) on my box seems to load firmware at will.
> >Sometimes it loads the Digiface firmware into my Multiface, sometimes
> >it loads the correct one.
> >
> >I suppose I could simply delete the digiface firmware from the path,
> >but what is it that makes it load the wrong one?
> >
> >correct one:
> >kernel: [98033.160982] pci 0000:05:00.0: BAR 0: assigned [mem 0xf0000000-0xf000ffff]
> >kernel: [98033.161012] pci 0000:05:00.0: no hotplug settings from platform
> >kernel: [98033.161264] snd_hdsp 0000:05:00.0: enabling device (0000 -> 0002)
> >kernel: [98033.467674] Hammerfall-DSP: wait for FIFO status <= 0 failed after 30 iterations
> >kernel: [98033.474630] snd_hdsp 0000:05:00.0: firmware: agent loaded multiface_firmware_rev11.bin into memory
> >
> >wrong one:
> >kernel: [98146.327251] Hammerfall-DSP: loading firmware
> >kernel: [98149.392459] Hammerfall-DSP: finished firmware loading
> >kernel: [98243.384790] pci 0000:05:00.0: BAR 0: assigned [mem 0xf0000000-0xf000ffff]
> >kernel: [98243.384824] pci 0000:05:00.0: no hotplug settings from platform
> >kernel: [98243.385118] snd_hdsp 0000:05:00.0: enabling device (0000 -> 0002)
> >kernel: [98243.689751] snd_hdsp 0000:05:00.0: firmware: agent loaded digiface_firmware_rev11.bin into memory
> >
> >Does someone else have the same issue?
> 
> not yet, but i haven't used the card in two weeks.
> 
> which kernel, which distro?
oh, rather conservative Debian testing under 3.2.0-4-rt-amd64
But the hdsploader code is really old anyway.

best, P