[LAU] New hardware setup for recording (not same as existing threads)

[Ralf Mardorf]

On Sat, 30 May 2015 03:03:17 +0200, Michael Jarosch wrote:
>I tried to keep my Presonus converters in sync via ADAT, exclusively,
>and I got dropouts. The manufactures answer was, that I have to use
>Wordclock.
>
>Again, I had no problem with that f*** cheap Behringer-device, syncing
>it with ADAT. Could be fortune. I don't know. :)

Did you try to change slave and master when syncing the Presonus via
ADAT?

On Sat, 30 May 2015 02:14:56 +0200, Michael Jarosch wrote:
>Am Freitag, den 29.05.2015, 23:34 +0200 schrieb Ralf Mardorf:
>> I bought my RME HDSPe AIO 4 years ago and today I still don't know
>> how to get access to more than the first 2 ADAT channels by jackd.
>
>You mean 2 channels or 2*8 ADAT-channels?

2 channels :(, channels 3 to 8 have silent jack ports.

On Fri, 29 May 2015 20:31:13 -0400, Martin Cracauer wrote:
>Ralf Mardorf wrote on Fri, May 29, 2015 at 11:34:43PM +0200: 
>> card 0: HDSPMx579bcc [RME AIO_579bcc], device 0: RME AIO [RME AIO]
>> card 1: EWX2496 [TerraTec EWX24/96], device 0: ICE1712 multi [ICE1712
>> card 2: EWX2496_1 [TerraTec EWX24/96], device 0: ICE1712 multi
>
>Can you clarify what these three devices represent? The first one is
>for all the optical ADAT in, the other two for other units on the
>card?

Before I bought the RME card I used TerraTec for audio and MIDI, today I
use the RME card for audio and MIDI and TerraTec for MIDI only.
for MIDI.