[LAU] [darkice] (SOLVED) Re: Cant Get Creative E-MU USB audio interface to work

Paul Davis paul at linuxaudiosystems.com
Fri Apr 1 12:12:33 UTC 2016


I would state with almost absolute certainty that your .asoundrc file has
no part to play here. The thing that made it work is telling darkice to use
plughw:.... rather than hw:... which allows ALSA to fake the hardware setup
that darkice says it wants. When you use hw:... you can only use hardware
parameters that are directly supported by the hardware itself, which
sometimes are not the ones you want/need to use.

On Fri, Apr 1, 2016 at 6:24 AM, Ben Edwards <ben at funkytwig.com> wrote:

> OK, got it working, used .~/asoundrc
>
> pcm_slave.sl3 {
>    pcm "plughw:1,0"
>    channels 2
>    rate 44100
> }
>
> pcm.complex_convert {
>    type plug
>    format S16_LE
>    slave sl3
> }
>
> And the darkice.cfg input section is
>
> [input]
> device          = plughw:1,0    # Alsa soundcard device for the audio
> input (barenger)
> sampleRate      = 44100     # sample rate in Hz. try 11025, 22050 or 44100
> bitsPerSample   = 16
> channel         = 2         # channels. 1 = mono, 2 = stereo
>
> Ben
>
>
> On 01/04/2016 11:03, Niels Dettenbach wrote:
>
> Am Freitag, 1. April 2016, 10:53:03 schrieb Ben Edwards:
>
> OK, just tried that
>
> ...i've figured out that we have a few 24bit consumer interfaces (USB) too
> running with darkice.
>
> so it *should* work...
>
> could you try pls:
>
> 	device          = plughw:0
> or
> 	device          = plughw:1
>
> instead?
>
> I had to use this instead of the
> 	device          = hw:0,0
>
> If that did not help, i would try to disable realtime for first until it is
> working (just as a shot)...
>
> hth
>
>
> --
> *Ben Edwards, Video Editor/Colorist & Cameraman*
> w:www.funkytwig.com t. 01179 118 144 m.:07773 02 44 82
> skype:funkytwig twitter:@funkytwig
> PGP Public key available from pgp.mit.edu
>
> If you are a freelancer FreeAgent is a great system to do your accounts,
> if you use http://www.freeagent.com/?referrer=42j4d743
> (referral code is 42j4d743) you get 10% off each month.
>
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user at lists.linuxaudio.org
> http://lists.linuxaudio.org/listinfo/linux-audio-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxaudio.org/pipermail/linux-audio-user/attachments/20160401/b3bdffd9/attachment.html>


More information about the Linux-audio-user mailing list