<div dir="ltr"><div>Hi,</div><div><br></div><div>Long story short, I am messing with my audio on a UbuntuStudio 16.04 laptop.</div><div><br></div><div>I had it setup to use XUSB from my X32...</div><div><br></div><div>I
 want to do some work without the X32, so I said, self, just fire up 
Qjackctl and set it back so the config with a Pulse sink/source and the 
system output is going to the local hardware.</div><div><br></div><div>Except,
 the default config has been lost. After some messing around, I get the 
pulse source/sink, but audio is not routed to the local speakers (this 
is a laptop).</div><div><br></div><div>Patchage shows the pulse sink 
connected to system/playback and if I play audio from an app (for 
example clementine) configured to the pulse sink, it shows signal in the
 Output Devices tab in volume control on the pulse sink.</div><div><br></div><div>Basically, as far as I can tell, I've managed to screw up my audio config on this PC.</div><div><br></div><div> I admit the sound configuration on linux has been my nemesis for years... <br></div><div><br></div><div>After
 much googling and reading until eyes are blurry...I could use some 
ideas on what to look at or how to figure out what I f'd up.</div><div><br></div><div>:(<br></div><div><br></div><div>Regards,</div><div>Mac</div><br></div>