<div dir="ltr"><div dir="ltr"><div>I sent a long email about testing Ubuntu Studios Controls.</div><div><br></div><div>Since it got dumped because it was too long thanks to inserting screen captures, I then wrote a fixed version and the subject changed creating broken thread. I'll paraphrase (and I hope this reply is going to the original thread. Sorry.)</div><div><br></div><div>Short version:</div><div>- Ubuntu Studio Controls doesn't know about ffado.</div><div>- I attempted to force things from the command line, but was unsuccessful.</div><div>In fact, I'm not sure I can even get Ubuntu Studo Controls to do nothing.<br></div><div>- Ubuntu Studio Controls also has a problem with retaining the selections for bridging, etc. If you check them off, then logout/login or reboot they are back to default (checked). The last time I logged in and started Carla, there were 12 in/out's for the AF12 and 2 captures for the on board sound card...<br></div><div><br></div><div>At first during my messing around I could only get the long form of the port names to show up (i.e. 00148605c4409ac_Unknown_out, 00148605c4409ac_Unknown0_out, etc.) and not human readable names like capture_1, etc. But, something I did is now causing the human readable version to appear...don't what caused this and not sure if it will be there when I boot tomorrow...</div><div><br></div><div><br></div></div></div>