<div dir="ltr">If you are thinking of using the audio interface also as a CV controller, note that both Motu AVB interfaces and some Presonus interfaces are DC-coupled and can be used as CV interfaces as well as multi channel units (at the same time). Other cards might do DC as well-<div>Very good onboard routing/mixing capabilities on the Motu devices.<br></div><div><br></div><div>Just another 2c take on the subject since Eurorack people might need/want CV more than other people, I guess</div><div><br></div><div>/Anders</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">Den sön 24 nov. 2019 kl 20:10 skrev David Kastrup <<a href="mailto:dak@gnu.org">dak@gnu.org</a>>:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Mario Lang <<a href="mailto:mlang@delysid.org" target="_blank">mlang@delysid.org</a>> writes:<br>
<br>
> Hi.<br>
><br>
> For years, I used an RME HammerFall under Linux.  I love this card, but<br>
> I finally goota say goodbye to PCI.  What USB/ThunderBolt multichannel<br>
> card with mixing/routing capabilities would you recommend?<br>
<br>
There is the RME Multiface which you likely could use via ThunderBolt to<br>
Expresscard adapter.  Whether to bother with something that old is<br>
another question.<br>
<br>
> I have been out of the loop regarding semipro soundcard for many years<br>
> now, so I would be happy about some tips that get me started on<br>
> choosing a device.  I mostly need analog channels.  Ideally with a lot<br>
> of headroom, since I might be feeding it with quite hot signals<br>
> (eurorack).  I have heard there are also mixers these days that work<br>
> as a multichannel soundcards.<br>
<br>
Most of the time I use an Onyx 1620 mixer with Firewire card.  The<br>
"newer" variants of those mixers have an i after their number (like Onyx<br>
1620i) and come with Firewire built-in (and, except for the largest one,<br>
the 1640i, no longer with balanced recording outputs for separate analog<br>
recording pre-fader).  You'd need a Thunderbolt-to-Firewire interface,<br>
of course.  I use a built-in Firewire with my T420 but it does not come<br>
standard (I got it for about EUR10 and threw out the landline modem for<br>
that).<br>
<br>
The Onyx mixers are nice, but Firewire is not exactly new, and it was<br>
not exactly new when Linux changed to a new Firewire stack so older<br>
Expresscard adapters may actually have buggy support in spite of their<br>
age.<br>
<br>
I think I have an Onyx 400F here that is just a mic interface.  I<br>
strongly recommend against it in spite of its nicer portability: the DSP<br>
on it tends to die and there are lots of reports of it bricking.  Mine<br>
did.  No idea whether the comparatively new Linux ALSA software had<br>
something to do with it.<br>
<br>
Basically if you go for a Mackie, I'd take one of the mixers rather than<br>
the interface-only things.<br>
<br>
RME has more modern interfaces (like the Babyface) but I am not sure<br>
what their actual multichannel offerings are.<br>
<br>
> Maybe that might be interesting.  However, I will only be using it<br>
> with linux, so I am really looking for something that is known to work<br>
> nicely.  Will be using it with JACK and SuperCollider.<br>
<br>
-- <br>
David Kastrup<br>
_______________________________________________<br>
Linux-audio-user mailing list<br>
<a href="mailto:Linux-audio-user@lists.linuxaudio.org" target="_blank">Linux-audio-user@lists.linuxaudio.org</a><br>
<a href="https://lists.linuxaudio.org/listinfo/linux-audio-user" rel="noreferrer" target="_blank">https://lists.linuxaudio.org/listinfo/linux-audio-user</a><br>
</blockquote></div>