On 08/15/16 14:11, xan wrote:
Hi,

after some weeks of silence, I got back to this issue. I installed zita-njbridge on both my machines, started the JACK server and tried to run the commands.

'zita-j2n b`s-ip port' is running on A and 'zita-n2j a`s-ip port' is running on B.
However, I don`t know the port I`m supposed to use and I couldn` find out.

The command seems to run on A but fails on B: "Failed to connect to socket. Cannot assign request address."

I`d appreciate some debugging here.

Thanks in advance,
xan.

Am 19.07.2016 um 07:13 schrieb Athanasios Silis:

Hi Fons,
i'm not implying there was something wrong with zita-*2*, i'm sure in fact it is some network issue that caused the jitter from the speakers, it was nonetheless a jitter.
Now where zita-*2* offered jitter ,alsa_* did not , provided the same arguments where used (ie for low latency).

I am sure had I spend more time on it I would have found a solution - i do not question zita-* is "future" while alsa_* is "obsolete", but for the given transition to zita-* , I had to revert to alsa_*

On Thu, Jul 14, 2016 at 8:53 PM, Fons Adriaensen <fons@linuxaudio.org <mailto:fons@linuxaudio.org>> wrote:

    On Thu, Jul 14, 2016 at 04:32:29PM +0300, Athanasios Silis wrote:

    > in a similar setup zita* stuff has not worked great for me - I got alot of
    > noise , so I switched to using the more primitive alsa_in and alsa_out.

    There a many ways a link using zita-*2* can go wrong, depending on
    network performance and if your Jack systems by themselves are OK
    or not. But 'noise' is not one of the possible results.

    --
    FA

    A world of exhaustive, reliable metadata would be an utopia.
    It's also a pipe-dream, founded on self-delusion, nerd hubris
    and hysterically inflated market opportunities. (Cory Doctorow)

    _______________________________________________
    Jack-Devel mailing list
    Jack-Devel@lists.jackaudio.org <mailto:Jack-Devel@lists.jackaudio.org>
    http://lists.jackaudio.org/listinfo.cgi/jack-devel-jackaudio.org




_______________________________________________
Jack-Devel mailing list
Jack-Devel@lists.jackaudio.org
http://lists.jackaudio.org/listinfo.cgi/jack-devel-jackaudio.org


_______________________________________________
Jack-Devel mailing list
Jack-Devel@lists.jackaudio.org
http://lists.jackaudio.org/listinfo.cgi/jack-devel-jackaudio.org

b should also have b's ip.   i use ports in the 46xx range - not sure why. it works.

-- 
www.the-temp-agency.com/lollipop-factory