Hi Christophe and others,


There has been little progress here on AES67 support in jack. We had to give priority to other issues in response to clients requests at azilpix. However, its still on the list. In fact, I'd need only a couple of work days to finish a first sharable version of a AES67 jack client.

I am also interested in evaluating your students work, whenever ready.

Best,

Philippe.

Philippe BEKAERT
Full professor - project leader
Hasselt University - Expertise center for Digital Media
Wetenschapspark 2, 3590 Diepenbeek, Belgium
www.edm.uhasselt.be
Tel: +32 11 268411





On 24 Jun 2018, at 12:20, Christoph Kuhr <christoph.kuhr@web.de> wrote:

Hi *,

long time no update...

AES67 for baresip is nearly ready and is now being evaluated by the master student.

It will be available two months from now, I think.

Did you make some progress?

BR,
Christoph


On 12/20/2017 07:45 AM, Happy wrote:
Just received two of these (HP) I-210 "PCI 2.1" cards (from Amazon). Installed one of them in and old PC with a PCI-e 2.0 x 4 slot (thus only using part of the slot). Initially windows reported an error and it did not work. Went back to Ubuntu 17.10 on the same machine and it worked fine. (Same result as another person before me). Disabled the internal NIC and started Windows again. Voila, it worked ! Re-enabled the on-board NIC and it kept Working in windows. Just for reference.  Don't have a AVB audio device so cannot really test them. Looking if there is any AVB test software out there to use these two cards to transmit AVB based audio from one to the other.
From talking to Focusrite regarding AES67 and the Rednet series and firmware support, got the following:  "With regards to AES67 compatibility, this is possible for devices using the 'Brooklyn 2' Dante chipset. RedNet 3s ship with a 'Brooklyn 1' chipset, though it's possible to upgrade to a Brooklyn 2 (this would be chargeable). All of our devices using Brooklyn 2 modules have AES67 compliance following the latest firmware update available from RedNet Control"  (Focusrite Rednets use the Bonjour/mDNS protocol for discovery)
In conclusion, the 3 parts needed for full functionality on Linux
[1] Discovery - mDNS should be doable in Linux, right ?
[2] AoIP  / clocking - This AES67 project
[3] Control (of the device) - Windows/Mac for the moment. Hopefully suppliers will support some kind of new standard in the future for that as well ( HTML XML, JSON  or other open messaging over IP to configure the unit). The Rednet3 will keep the routing/configuration after power cycling thus until then that should be done under Windows.
Looking forward on the progress  of this project !
On 10/1/2017 4:32 PM, Christoph Kuhr wrote:
A few years back there had been a AES67/Ravenna implementation. But the developer and ALX Networks could not agree on the license. The developer wanted to publish it under GPL, which ALX Networks did not want. So the implementation was dumped. Well, that is the story how I know it.
The developer was Florian Faber, but he is no member of the jack-devel or linux-devel list anymore. Perhapes, he might have some useful insights, if you manage to find a contact. ;-)

On 09/30/2017 06:12 AM, happy musicmaker wrote:
There are some different I210 card versions it seems, any recommendations ?

They are all ok. I have different versions myself: Intel I210, HP I210TI. But make shure it is no I217, because they have no traffic shaping queues. Although they suport HW PTP timestamping.



BR,
CK




On Thu, Sep 28, 2017 at 6:11 PM, Christoph Kuhr <christoph.kuhr@web.de <mailto:christoph.kuhr@web.de>> wrote:

    With an Intel I210 NIC you can already have AVB in combination with
    Jack. But you have to do some coding yourself to fit your purposes..


    BTW:
    I would never recommend buying MOTU.


    BR,
    Ck


    On 09/28/2017 08:33 AM, happy musicmaker wrote:

        MOTU just released the 828es with AVB and USB standard compliant
        and two ADAT I/O and Web based (not ALSA) mixer. That would be,
        for now, the ultimate (AVB)  interface for Linux,  if it works.

        On Thu, Sep 28, 2017 at 11:31 AM, happy musicmaker
        <happy.musicmaker@gmail.com <mailto:happy.musicmaker@gmail.com>
        <mailto:happy.musicmaker@gmail.com
        <mailto:happy.musicmaker@gmail.com>>> wrote:

             That is such good news.  What(low cost)  hardware would this
             development be used on to support the developers with
             testing/debugging and maybe even development ?

             * MOTU LP32 (Preferred)
             * MiniDSP
        https://www.minidsp.com/products/network-audio/avb-dg
<https://www.minidsp.com/products/network-audio/avb-dg>
<https://www.minidsp.com/products/network-audio/avb-dg
<https://www.minidsp.com/products/network-audio/avb-dg>> (I think
             MOTU's switch uses midDSP switch hardware)

             I hope someday it will be possible to connect 4 or more 8
        channel
             ADAT modules (32 channels) to a PC under Ubuntu via AVB
        with low
             latency. The only option to get this done under Windows is a
             Focursrite DANTE based Rednet 3 right now because
        Thunderbolt is not
             really available there as well. Plan to get Rednet3,  but
        that does
             not solve the Linux environment which I prefer. Would love
        to be
             able to use the Rednet 3 under Linux but since DANTE is
        proprietary
             , so unlikely.

             My two wishes:
                [a] Multi (16+) channel low latency audio I/O using ADAT
        audio AD/DA
                [b[ Bitwig  supporting LV2 plugins.

             With those two,  the Linux Audio environment would be
        perfect and
             the world a better place.

             *(Apology for the re-sends and ignore the previous edits.
        Web based
             Gmail is such a annoyance and un-logically structured)*




        _______________________________________________
        Jack-Devel mailing list
        Jack-Devel@lists.jackaudio.org
        <mailto:Jack-Devel@lists.jackaudio.org>
http://lists.jackaudio.org/listinfo.cgi/jack-devel-jackaudio.org
<http://lists.jackaudio.org/listinfo.cgi/jack-devel-jackaudio.org>


    _______________________________________________
    Jack-Devel mailing list
    Jack-Devel@lists.jackaudio.org <mailto:Jack-Devel@lists.jackaudio.org>
http://lists.jackaudio.org/listinfo.cgi/jack-devel-jackaudio.org
<http://lists.jackaudio.org/listinfo.cgi/jack-devel-jackaudio.org>