On 04/21/2010 05:49 PM, Louigi Verona wrote:

Hey Patrick!

This is exactly what I am trying to say - I had that buzz BEFORE you added delay function. If you take the original kluppe - it has the buzz too - if you route the signal straight from an individual loop audio outs.
So if buzz is in individual loop audio outs - how come does it not appear from the main out?

To be specific we can hear the buzz in the following situations.

1: Manual pause on channel output
2: Delayed playback pause on channel output
3: Delayed playback pause on main output

We do not hear the buzz with manual pause on main output.

If anyone has an idea on why that may be possible I would appreciate your insight.

The updated source for kluppe with playback delay in place is at this address:

http://djcj.org/code/kluppe-0.6.14-playbackdelay.tar.bz2

To enable the delay you need to change the bottom right spinbox in the spinbox grid panel for a specific loop.

Cheers.

Patrick Shirkey
Boost Hardware Ltd

On Wed, Apr 21, 2010 at 10:12 AM, Patrick Shirkey <pshirkey@boosthardware.com> wrote:
On 04/21/2010 03:44 PM, Louigi Verona wrote:
You mean even from main out?

Just to be sure I have explained well - if I route (in patchage for instance) the signal from "main out", then I get no buzz during pause. If I route from an individual loop out, then I do get the buzz.

Yeah, I don't get any buzz when pausing playback normally. Only while the delayed pause is in action.
Patrick Shirkey
Boost Hardware Ltd