29 May
2009
29 May
'09
5:46 p.m.
Hi,
this is my first post to LAD. The discussion about a hammond simulation "Fons
could you make us...", Beatrix and some research for writing a (german)
wikipedia article (stub) about the Vox Continental inspired me to hack a quick
organ program that simulates the internal signal flow of the "Connie" with JACK
MIDI input and JACK audio output.
Have fun:
http://cryptomys.de/horo/Connie/Connie-0.1.tar.gz
Ciao
Martin Homuth-Rosemann
30 May
30 May
9:21 a.m.
Am Freitag, den 29.05.2009, 21:46 +0200 schrieb linuxaudio:
Hi,
this is my first post to LAD. The discussion about a hammond simulation "Fons
could you make us...", Beatrix and some research for writing a (german)
wikipedia article (stub) about the Vox Continental inspired me to hack a quick
organ program that simulates the internal signal flow of the "Connie" with JACK
MIDI input and JACK audio output.
Have fun:
http://cryptomys.de/horo/Connie/Connie-0.1.tar.gz
Ciao
Martin Homuth-Rosemann
Hi horo
As a quick hack not bad.:)
There are some things I dont like,
1.) there is a glitch when change the note
2.) there is no handler for all notes off (panic)
3.) cpu blow up when hold a key on.
but like I said, not bad.
regards
hermann
12:03 p.m.
Am Samstag, 30. Mai 2009 schrieb hermann meyer:
There are some things I dont like,
1.) there is a glitch when change the note
That's already on my todo list. It's because I switch the signals on/off
without any smoothing like in a real instrument RC, parasitics etc.
I have two solutions to choose from:
1. I'll add some filtering - maybe in the output stage.
2. Delay the switch on/off until zero crossing.
2.) there is no handler for all notes off (panic)
ok.
3.) cpu blow up when hold a key on.
Connie 0.1 is a straight 1:1 translation from schematics found at
http://www.reinout.nl/?page_id=80
A lot of optimizing still has to be done - you're welcome ;)
That's why I "release early, release often".
but like I said, not bad.
regards
hermann
Thanks
Martin
NEW VERSION:
Connie 0.2 (good vibrations)
added:
stereo output
vibrato does fm and pan shifting (simplified leslie sim)
Shift key -> panic
http://cryptomys.de/horo/Connie/Connie-0.2.tar.gz
31 May
31 May
8:58 a.m.
Martin Homuth-Rosemann wrote:
Am Samstag, 30. Mai 2009 schrieb hermann meyer:
Thanks for your work. Looks promising.
I doubt if the vibration of 0.2 is better then 0.1. The tempo of the
vibration if very high...
\r
There are some things I dont like,
1.) there is a glitch when change the note
That's already on my todo list. It's because I switch the signals on/off
without any smoothing like in a real instrument RC, parasitics etc.
I have two solutions to choose from:
1. I'll add some filtering - maybe in the output stage.
2. Delay the switch on/off until zero crossing.
2.) there is no handler for all notes off
(panic)
ok.
3.) cpu blow up when hold a key on.
Connie 0.1 is a straight 1:1 translation from schematics found at
http://www.reinout.nl/?page_id=80
A lot of optimizing still has to be done - you're welcome ;)
That's why I "release early, release often".
but like I said, not bad.
regards
hermann
Thanks
Martin
NEW VERSION:
Connie 0.2 (good vibrations)
5438
days inactive
5440
days old
linux-audio-dev@lists.linuxaudio.org
3 comments
4 participants
participants (4)
-
Grammostola Rosea -
hermann meyer -
linuxaudio -
Martin Homuth-Rosemann