Linux-audio-user

linux-audio-user@lists.linuxaudio.org

3 participants
20662 discussions

Can't get the stereo imaging from the speakers

by jonetsu

Hello, I got speaker stands from the Yamaha HS5 powered speakers. So they are at ear level on each side of the desk. This results in hearing the music not as it comes from the speakers, but directly from the center of the monitor. Which is nice. One would think the audio comes from the monitor. To this the HS8 subwoofer sits on the ground under the desk to the left. To the left is also some 12x12 audio foam tacked to the wall, for guitar recording. The problem with this is that when a track is panned completely to one side only its volume decreases. The audio of that track does not move to the side. I have to use the headphones many times in the mixing to get the stereo imaging. Which is OK, as I like to get the headphones point of hearing, but it'd be nice to hear the stereo effect through the speakers also. Any advice on how to use speakers so that it's possible to hear the stereo imaging ? Cheers.

7 years, 10 months

Merry Christmas Python Chiptune (sortof)

by Lorenzo Sutton

A Merry Christmas to all LAU and especially a warm thank you to all LAD who make such great and fun Audio / Music / ... software on Linux! And just because the season makes us nostalgic, a bit of lo-fi chiptunish sound: https://gitlab.com/lorenzosu/Python_Bells_2017/raw/master/pybells_2017.py (Needs python3) To make noise paste this in a terminal (assumes you have aplay): wget https://gitlab.com/lorenzosu/Python_Bells_2017/raw/master/pybells_2017.py;\ python pybells_2017.py;\ aplay python_bells_2017.wav Lorenzo. PS: And please, do not take the code seriously... ;)

7 years, 10 months

[Music] Elixir

by jonetsu

Hello. This is a synth piece that starts smoothly then goes into higher gear with busy drums and bass over which a theme/synth lead hovers. Made using the latest u-he Repro-5 synth and the Hollo Xpressive soundset. Created in Bitwig, mixed in Mixbus32C. All in Linux. https://soundcloud.com/nominal6/elixir Cheers.

7 years, 10 months

USB audio interfaces with more than 16 digital output channels ?

by Niklas Reppel

Hi, i'm currently looking for interfaces that have more than 16 digital outputs for higher-order ambisonics applications. One of my requirements would be that they work with recent laptops, that is laptops that don't have expresscard or firewire interfaces, as those unfortunately aren't built any more. I've stumbled over a LAU post from 2016 where options were discussed. There's the DiGiCo UB Madi that is reported to work, but the price is ridiculous, and also it seems rare/hard to be obtained or even out of production. The RME Madiface USB aren't working at all (tried one of them myself). So, the PCIe and ExpressCard versions of the RME MADI interfaces have been reported working, but has anybody ever tried to use them with USB-to-PCIe or USB-to-ExpressCard adapters? Otherwise, ase the market brought forth new options ? Any advice is appreciated ! Best, Niklas -- Niklas Reppel www.parkellipsen.de

7 years, 10 months

Fwd: [Rosegarden-user] ROSEGARDEN 17.12, codename "Ultimate Pleasure" RELEASED

by Lorenzo Sutton

Hi LAU people, I guess this might be of interest to some subscribers on here :-) -------- Forwarded Message -------- Subject: [Rosegarden-user] ROSEGARDEN 17.12, codename "Ultimate Pleasure" RELEASED Date: Wed, 20 Dec 2017 12:20:34 -0500 To: rosegarden-user(a)lists.sourceforge.net ROSEGARDEN 17.12, codename "Ultimate Pleasure" RELEASED The Rosegarden team is proud to announce the release of version 17.12 of Rosegarden, a MIDI sequencer that features a rich understanding of music notation along with basic support for digital audio. http://www.rosegardenmusic.com/ 17.12 brings us numerous bug fixes by Yves Guillemot and Ted Felix. Ted has also continued his work on cleaning up the source base with a rewrite of the Audio Mixer window and simplified handling of the volume, pan, etc... control change knobs and faders. BUG FIXES * Fix progress dialog lockups in KDE (bug #1546, r15031-r15034) * Fix disappearing lyrics in lyrics editor (bug #1547, r15035-r15036) * Fix bug #1548: Last syllable of lyrics is not copied between two linked segments. (r15037) * Fix bug #1550: Crash with lyric editor and linked segments (r15038) * Fix bug #1551: No sound from an audio file when pressing rewind then play. (r15039) * Fix bug #1549: Matrix Editor: Velocity ruler not updated correctly when changing velocity using the velocity tool (r15041-r15046) * Fix alias change not updating label on the audio instrument parameters. (r15058) * Fix miscellaneous cosmetic issues related to the ThornStyle upgrade. (r15076-r15081) * Fix time mode toolbar buttons on the Event List and other windows. (r15083) * Fix incorrect window titles on the preferences and document properties windows. (r15084) * Fix garbage property names in Event Edit window. (r15085) * Display velocities modified from the velocity ruler in the status bar for the notation editor. (r15088) * Fix bug #1552: Rosegarden fails to build with cmake-3.9.0. (r15089) * Fix crash when launching plugin dialog introduced by r14648. (r15091) * Fix external controller audio volume/pan bug (r15107) * Fix crash in rulers when pressing mouse buttons (r15116) * Export to LilyPond as a repeat sequence several consecutive linked segments is now possible (bug #1470, r15119) * Fix duplicate connection in initial autoload (r15122) * Fix crash when exporting to LilyPond. (bug #1553, r15135) * Fix lilypond options dialog too big. (r15140) NEW FEATURES * Add "Use track name for new segments" preference. (r15090) Ted.

7 years, 10 months

[Music] jam230

by jonetsu

Just quickly, for fun. The context is a certain amount of people for whom Repro-5 and 1 are not working on their Linux systems while on mine they do. So I described my system and all that, and we exchange with Alex from u-he who works on the Linux versions of the synths, and then thought of posting some 'waiting room music' while a solution is searched for. So this is improvisation # 230. The synths are Repro-5 * 3, Zebra (strings), ACE (for the bass), pianoteq 6 for the, ahem, piano, and Biotek for the little buzzy critter. https://soundcloud.com/nominal6/jam230 Cheers.

7 years, 10 months

focusrite-control running in wine

by Peter

Dear All, has someone managed to run successfully focusrite-control.exe inside wine? I'd really like to access the hardware mixer from Linux. I have no windows installed on my Laptop, so I can't test whether there is an issue with the usb ports. I installed focusrite-control-2.1.7.exe in all kind of different ways, using wine from kubuntu 17.10, and winehg-staging. All I managed is that the programm opens and reports "No Hardware connected", same for the ASIO control. I also tried the live version of io-live--2017.03--e22-k4.14-k4.14-rt1-amd64, with the same result. Opening winecfg I can switch to my Scarlett 18i20 and pushing the button for testing sound it works. I've also installed OpenMPT1.27.02 inside wine and it works nicely. There, I can even switch to 96kHz, which doesn't work on ALSA/JACK, so something is done inside wine, not just passing to the outside. Best regards, Peter

7 years, 10 months

[ANN] Vee One Suite 0.8.6 - The End of Autumn'17 release

by Rui Nuno Capela

Wholly greetings! The 'Vee One Suite' of so called 'old-school' software instruments, synthv1 [1] as a polyphonic subtractive synthesizer, samplv1 [2] a polyphonic sampler synthesizer, drumkv1 [3] as yet another drum-kit sampler and padthv1 [4] as a polyphonic additive synthesizer, are here released just in time for the merry season greetings. As before, all available in dual standard forms:<ul> - a pure stand-alone JACK client with JACK-session [5], NSM (Non Session management [6]) and both JACK MIDI and ALSA MIDI [7] input support; - a LV2 instrument plug-in [8]. The almost common change-log for this end-of-season follows: - Sync option added to DCO wavetable oscillators, as for making either one to hard-sync (slave) with the other one (master) in each pair. (applies to synthv1 [1] only) - Micro-fade-in/out that were stapled at the loop start/end points respectively is now gone.(applies to samplv1 [2] only) - Set on a minimum attack time of 500usec as much to prevent audible clicking on low-pitched notes. Back in order of appearance: **synthv1 - an old-school polyphonic synthesizer [1] ** synthv1 0.8.6 (end-of-autumn'17) released! synthv1 is an old-school all-digital 4-oscillator subtractive polyphonic synthesizer with stereo fx. LV2 URI: http://synthv1.sourceforge.net/lv2 website: http://synthv1.sourceforge.net https://synthv1.sourceforge.io downloads: http://sourceforge.net/projects/synthv1/files - source tarball: http://download.sf.net/synthv1/synthv1-0.8.6.tar.gz - source package: http://download.sf.net/synthv1/synthv1-0.8.6-36.rncbc.suse.src.rpm - binary packages (openSUSE Tumbleweed): http://download.sf.net/synthv1/synthv1-0.8.6-36.rncbc.suse.i586.rpm http://download.sf.net/synthv1/synthv1-0.8.6-36.rncbc.suse.x86_84.rpm - AppImage packages (JACK stand-alone only): http://download.sf.net/synthv1/synthv1-0.8.6-3.x86_64.AppImage git repos: http://git.code.sf.net/p/synthv1/code https://github.com/rncbc/synthv1.git https://gitlab.com/rncbc/synthv1.git https://bitbucket.org/rncbc/synthv1.git **samplv1 - an old-school polyphonic sampler [2]** samplv1 0.8.6 (end-of-autumn'17) released! samplv1 is an old-school polyphonic sampler synthesizer with stereo fx. LV2 URI: http://samplv1.sourceforge.net/lv2 website: http://samplv1.sourceforge.net https://samplv1.sourceforge.io downloads: http://sourceforge.net/projects/samplv1/files - source tarball: http://download.sf.net/samplv1/samplv1-0.8.6.tar.gz - source package: http://download.sf.net/samplv1/samplv1-0.8.6-36.rncbc.suse.src.rpm - binary packages (openSUSE Tumbleweed): http://download.sf.net/samplv1/samplv1-0.8.6-36.rncbc.suse.i586.rpm http://download.sf.net/samplv1/samplv1-0.8.6-36.rncbc.suse.x86_84.rpm - AppImage packages (JACK stand-alone only): http://download.sf.net/samplv1/samplv1-0.8.6-3.x86_64.AppImage git repos: http://git.code.sf.net/p/samplv1/code https://github.com/rncbc/samplv1.git https://gitlab.com/rncbc/samplv1.git https://bitbucket.org/rncbc/samplv1.git **drumkv1 - an old-school drum-kit sampler [3]** drumkv1 0.8.6 (end-of-autumn'17) released! drumkv1 is an old-school drum-kit sampler synthesizer with stereo fx. LV2 URI: http://drumkv1.sourceforge.net/lv2 website: http://drumkv1.sourceforge.net https://drumkv1.sourceforge.io downloads: http://sourceforge.net/projects/drumkv1/files - source tarball: http://download.sf.net/drumkv1/drumkv1-0.8.6.tar.gz - source package: http://download.sf.net/drumkv1/drumkv1-0.8.6-32.rncbc.suse.src.rpm - binary packages (openSUSE Tumbleweed): http://download.sf.net/drumkv1/drumkv1-0.8.6-32.rncbc.suse.i586.rpm http://download.sf.net/drumkv1/drumkv1-0.8.6-32.rncbc.suse.x86_84.rpm - AppImage packages (JACK stand-alone only): http://download.sf.net/drumkv1/drumkv1-0.8.6-3.x86_64.AppImage git repos: http://git.code.sf.net/p/drumkv1/code https://github.com/rncbc/drumkv1.git https://gitlab.com/rncbc/drumkv1.git https://bitbucket.org/rncbc/drumkv1.git **padthv1 - an old-school polyphonic additive synthesizer [4]** padthv1 0.8.6 (end-of-autumn'17) released! padthv1 is an old-school polyphonic additive synthesizer with stereo fx padthv1 is based on the PADsynth algorithm by Paul Nasca, as a special variant of additive synthesis. LV2 URI: http://padthv1.sourceforge.net/lv2 website: http://padthv1.sourceforge.net https://padthv1.sourceforge.io downloads: http://sourceforge.net/projects/padthv1/files - source tarball: http://download.sf.net/padthv1/padthv1-0.8.6.tar.gz - source package: http://download.sf.net/padthv1/padthv1-0.8.6-3.rncbc.suse.src.rpm - binary packages (openSUSE Tumbleweed): http://download.sf.net/padthv1/padthv1-0.8.6-3.rncbc.suse.i586.rpm http://download.sf.net/padthv1/padthv1-0.8.6-3.rncbc.suse.x86_84.rpm - AppImage packages (JACK stand-alone only): http://download.sf.net/padthv1/padthv1-0.8.6-3.x86_64.AppImage git repos: http://git.code.sf.net/p/padthv1/code https://github.com/rncbc/padthv1.git https://gitlab.com/rncbc/padthv1.git https://bitbucket.org/rncbc/padthv1.git Licence: The 'Vee One Suite' are free, open-source Linux Audio [10] software, distributed under the terms of the GNU General Public License (GPL) [9] version 2 or later. References: [1] synthv1 - an old-school polyphonic synthesizer http://synthv1.sourceforge.net/ [2] samplv1 - an old-school polyphonic sampler http://samplv1.sourceforge.net/ [3] drumkv1 - an old-school drum-kit sampler http://drumkv1.sourceforge.net/ [4] padthv1 - an old-school polyphonic additive synthesizer http://padthv1.sourceforge.net/ [5] JACK Audio Connection Kit http://jackaudio.org/ [6] NSM, Non Session Management http://non.tuxfamily.org/nsm/ [7] ALSA, Advanced Linux Sound Architecture http://www.alsa-project.org/ [8] LV2, Audio Plugin Standard, the extensible successor of LADSPA http://lv2plug.in/ [9] GNU General Public License http://www.gnu.org/copyleft/gpl.html [10] Linux Audio consortium of libre software for audio-related work http://linuxaudio.org See also: http://www.rncbc.org/drupal/node/1879 Enjoy && have lots of fun ;) -- rncbc aka. Rui Nuno Capela -- rncbc aka. Rui Nuno Capela rncbc(a)rncbc.org

7 years, 10 months

[New music]: With an aching heart...

by Jeanette C.

Hey hey, ...is the title of the new piece. Here's the music: http://juliencoder.de/nama/with_an_aching_heart.ogg http://juliencoder.de/nama/with_an_aching_heart.mp3 What is it? It ended up as a rearrangement of parts of J.S. Bach's fugue in Eflat minor from the Well-Tempered Clavier Book I and Musorgsky's The old castle (fropm pictures at an exhibition) with a few changes, played on lovely synths and vocalised by me. Inspired by Clannad's (Theme for) Harry's game, though, alas, much darker. Still, the message remains: show a little kindness. Not because of the season (you've seen me Scrooge'ing), but just because. What's used: external hardware: DSI Prophet-12 for strings, pad, flute-like sound and one choir. Arturia MiniBrute for basses. Software: the wonderful Gigatron, free Mellotron library in GigaStudio format, a commercial Slina (string ensemble) and carillon library, also in Gig format. Jconvolver for the reverb on the vocals. Recording and mixing in Nama with the hlelp of many LADSPA plugins. So thanks to everyone who made this possible! Love you guys. Feedback is welcome. :) With kindness, Jeanette -------- * website: http://juliencoder.de - for summer is a state of sound * SoundCloud: https://soundcloud.com/jeanette_c Ain't no way I'll be lonely <3 (Britney Spears)

7 years, 10 months

RME AIO/9632 expansion boards AI4S-192 and AO4S-192

by Marek Cupák

Hello, it seems I can't find any info about these. Has someone tried them with the AIO? Thanks, Marek

7 years, 11 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-user