Another question about impedance and guitar sounds: I have a Tascam US 122 interface with guitar (hi-z)/line(low-z) switchers on the inputs (2 ins with preamps and 2 insert jacks) and a guitar tube amp with an effects loop preamp out (Fender Hot Rod Deluxe).

If I use my amp's preamp to colour my tone before going to the interface, will the signal coming from the preamp out be high impedance or low impedance (line). Should I plug the cable into the line level input, guitar (hi-z) input or the insert jack (since it has already been preamplified).

Would all this be worth the trouble? Will using tube preamplification change the attainable tones?

-Chris

2008/5/12 Arda Eden <ardaeden@gmail.com>:
You're absolutely right Darren,
A DI box is a necessary device in this situation. But specially designed cards with a direct input solves this problem also. Don't they ?


On Mon, May 12, 2008 at 8:54 PM, Darren Landrum <darren.landrum@sbcglobal.net> wrote:
Blargh. Sorry about that, list. Apparently, SBC is bog-slow at the moment.

-- Darren
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user



--
Arda EDEN
Cumhuriyet University
Faculty of Fine Arts
Department of Music Technology
Sivas/TURKEY

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user