On 05/15/2017 01:56 AM, Moshe Werner wrote:

        Could you elaborate on the connection scheme of your setup? Are the
        different Motu boxes connected via the AVB switches?


    The Motu boxes are connected through a Motu AVB switch and AVB
    streams. As I do not have OpenAVB working (yet), the connections to
    and from Linux are done through USB2. In all cases the main control
    machine is connected to a 16A and auxiliary computers through the
    24ai (because of AVB stream count). Everything else connects through
    the internal routing matrix and AVB streams, very flexible. All
    devices slave to one over AVB. Input and output not to the computer
    are handled through analog and/or ADAT I/O.

...

    So far so good... hopefully I will not run into any pitfalls :-)

So the computer is connected to the switch too i guess? Or how do you
control the routing?

I'm also connecting the computer to the switch to be able to control the routing matrix, actually I'm connected to one of the AVB enabled ports. The computer has an i210 Intel ethernet adapter that is AVB compatible although I'm not running AVB on it yet (hopefully at some point in the future I will be able to do away with the USB connection).

-- Fernando