Well, the mic pre on that card sounds like shit, so no I would not consider that obvious at all.  I go out of my way to only use the line inputs on my 1010LT.
 
But whatever,  best of luck.

On Sun, Jul 19, 2015 at 12:44 PM, fred <f.rech@yahoo.fr> wrote:
Of course the DIbox XLR output is used!

De : Robert Edge <thumbknucklerocks@gmail.com>
À : fred <f.rech@yahoo.fr>
Cc : "linux-audio-user@lists.linuxaudio.org" <linux-audio-user@lists.linuxaudio.org>
Envoyé le : Dimanche 19 juillet 2015 18h13
Objet : Re: [LAU] Interfacing an electric guitar

When going direct from guitar to computer you will want to be using the XLR inputs on the 1010LT, probably with the jumpers in the highest gain position.  The output of an electric guitar is quite low and you are going to lose even more with the insertion loss through the passive direct box.  I don't think it will drive the RCA jacks in a satisfactory manner.
 
re using a guitar amp in the chain: I've never had much luck with the headphone jacks on.  If you have a line out or effects send they might be worth trying instead. 
 
 

On Sun, Jul 19, 2015 at 11:06 AM, fred <f.rech@yahoo.fr> wrote:




Hello all,

Just got an electric guitar.  First time.  Now putting on a new set of
strings.

Got a 1/4" wire and a passive direct box that's already used for a
Wavedrum.  Got also a small guitar amp with an headphone out jack, as
an option.  The audio card is a M-Audio 1010LT.

Can I simply take the 1/4" wire from the passive direct box and connect
it to the guitar ?  I believe there's a guitar processing app out there
called something like rackarrack or such.  Does this work through jackd
as in doing the audio routing using qjackctl ?

Alternatively if I want the amp's sound and processing, I can simply
use the amp's headphone out, although I'd like to try the computer
based only interface and processing.

Cheers.


Hi happy Canadian guitarist :)

IMHO, best chain for the hardware you describe is
guit>DIbox>1010LT>QjackCtl>Guitarix>QJackCtl>1010LT>guit amp
if you only want to play guitar with Guitarix FX & modélisation?

TIP: don't forget to put a hard limiter before Guitarix out, this (very nice)
       software (available in french)))) is able to produce very hard level...

HTH, have fun!
Fred





_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user