14 Aug
2011
14 Aug
'11
11:11 p.m.
On 08/14/2011 11:00 PM, Joe Hartley wrote:
On Sun, 14 Aug 2011 22:10:51 +0200
rosea grammostola<rosea.grammostola(a)gmail.com> wrote:
Should netjack work with the same performance on a wireless connection,
compared to wired connection?
\r
On 08/14/2011 09:59 PM, Julien Claassen wrote:
You shouldn't listen to those people - I do it all the time.
Rosea!
How do you reach your slave computer from the master computer, say
by ping or ssh? That adress is the slave host. It's simple networking
stuff.
People told me that it's not possible to use openssh over a crossover
cable... It's no simple networking stuff apparently.
Maybe I should
explore that first, how to make connection via crossover cable (without
JACK).
Actually, it *is* simple networking stuff, but it sounds like you
don't
have the background for that. You have to know how to set IP addresses
manually, and a tiny bit about subnetting.
It will be much easier to set up the second machine the way you'd set
up any other machine, using a router that has a DHCP server to assign
the IP address and default route, etc. Even if for some reason you don't
have the machines you're playing with connected to a network, it'll still
be much easier doing this with a cheap router.