Hi!

I tried to make a Tascam US-122 "Classic" work with my Debian-testing-powered Thinkpad T410. I followed the instructions on https://alsa.opensrc.org/Tascam_US-122#Tascam_US-122_on_Debian_and_Ubuntu as far as I could (alsa-base is not in Debian, anymore) but once I tried to use the device for playback in pulseaudio I realized there was no sink created. Pulseaudio offers the possibility to use the TASCAM with "multiple input" besides "stereo input" (although I thought it's a stereo in/out device) but there was no option to use it as an output.

I tried to use jackd to double-check the missing output, but it failed to startup. Reason: "cannot configure playback channel"

The whole log (of the important part):

"jackdmp comes with ABSOLUTELY NO WARRANTY

This is free software, and you are welcome to redistribute it

under certain conditions; see the file COPYING for details

JACK server starting in realtime mode with priority 10

self-connect-mode is "Don't restrict self connect requests"

audio_reservation_init

Acquire audio card Audio1

creating alsa driver ... hw:USX2Y|hw:USX2Y|256|3|44100|0|0|nomon|swmeter|soft-mode|32bit

configuring for 44100Hz, period = 256 frames (5.8 ms), buffer = 3 periods

ALSA: final selected sample format for capture: 24bit little-endian in 3bytes format

ALSA: use 3 periods for capture

ALSA: final selected sample format for playback: 24bit little-endian in 3bytes format

ALSA: use 3 periods for playback

ALSA: cannot set hardware parameters for playback

ALSA: cannot configure playback channel

Released audio card Audio1

audio_reservation_finish

Cannot initialize driver

JackServer::Open failed with -1

Failed to open server"

Any ideas?

Greets! Mitsch