12 Dec
2016
12 Dec
'16
2:04 p.m.
Hi,
On Mon, 12 Dec 2016 11:16:58 +0100, Guido Aulisi wrote:
I own a first generation Focusrite Scarlett 18i20.
I can't really understand the need of very low latency when recording,
because the Scarlett has got an internal mixer, which can monitor the
input signal nearly at 0 latency. And I think that the Presonus
doesn't have an internal mixer, or at least it's not controllable from
a linux machine (the first generation Scarlett mixer is controllable
since kernel 3.19 thanks to Robin Gareus' reverse ingeneering work of
the protocol).
the problem is, that I want an audio device with a 30 days money back
guarantee and a three year warranty, not a second hand audio interface.
I couldn't find a first generation Focusrite, I only found the second
generation for sale.
For recording I neither need card hardware, nor software monitoring, I
could do this using my analog mixing console.
Of course if you use virtual instruments latency is
important, but I
always used the Scarlett as a simple recorder, so I cannot tell if it
works, I usually use a PCIe RME card when using virtual instruments
and it works well even with vanilla kernels and threadirqs, I get some
xruns when I use some heavy cpu virtual instrument sometimes.
You seem to have better luck than I've got. My PCIe RME card doesn't
work correctly with Linux, so I want to replace it by an USB audio
interface, apart from this the USB interface must work with iOS, too.
A few minutes ago I ordered a PreSonus 1818VSL.
Which RME PCIe card do you use? Mine is a HDSPe AIO.
Regards,
Ralf