23 Apr
2013
23 Apr
'13
12:42 a.m.
On Mon, April 22, 2013 10:26 am, Chris Caudle wrote:
Most envy24 chipsets use the same reg as clock speed. So on that picture
there is a "Multi Track internal Clock" - "48000" if it is expanded
the
external clock will be above 96000 (if that is the top speed).
From: Gabbe
Nord <gabbe.nord(a)gmail.com>
Subject: Re: [LAU] S/PDIF in with ESI Juli@ and JACK
Here's a picture of my QASMixer with the inputs as well:
http://www.imagebam.com/image/fef059250185749
Where is the clock select in that picture? If you look on page 18 of the card manual showing the
(Windows?) utility
for controlling the card, there is a selection box to set using the
internal or external clock. To use the S/PDIF input you must select
external clock.
That is different from the Delta series then. Good to know. Though that
could be a SW limit and not HW, but I would guess in this case it is HW.
While it makes sense to lock to spdif to use it, there are cases where the
spdif input may be locked to this card from it's spdif output for example,
where not using spdif clock, but still using the info makes sense.
--
Len Ovens
www.OvenWerks.net