Many thanks,
I will try it tomorrow.
Chris
Chris Bungue wrote:
> [ 16.932523] cannot find the slot for index 0 (range 0-5), error: -16
The driver tried to load at index 0, but another driver already has it:
> 0 [Device ]: USB-Audio - PnP Audio Device
> PnP Audio Device at usb-0000:00:02.0-7, full speed
> 1 [M4x4 ]: USB-Audio - MidiSport 4x4
> M-Audio MidiSport 4x4 at usb-0000:00:02.0-1, full speed
> 3 [U0x71040x2202 ]: USB-Audio - USB Device 0x7104:0x2202
> USB Device 0x7104:0x2202 at usb-0000:00:02.0-4, full speed
> 5 [VirMIDI ]: VirMIDI - VirMIDI
> Virtual MIDI Card 1
> options snd_ice1712 index=0
> options snd_usb_audio index=1
> options snd_usb_audio index=2
> options snd_virmidi index=4
You have *three* USB audio devices; and all settings for one module must
go into one line:
# options snd-usb-audio index=1,2,3
However, instead of that, there is a better option that allows you to
set the order correctly even if additional devices appear:
options snd slots=snd-ice1712,snd-usb-audio,snd-usb-audio,snd-usb-audio,snd-virmidi
To set the order of the USB devices, read the vendor and/or device IDs
with lsusb, and give those to the snd-usb-audio driver with the vid/pid
options. This line sets the MidiSport first and the unnamed device
second:
options snd-usb-audio pid=0x1020,0x2202
Regards,
Clemens
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user