Output works but no input?

Have you seen the two hardware pushbuttons where you can set the SOURCE
SELECT USB OUT (either M1 -M2, L -R PRE or L - R POST) You must select
the right thing there...


On 02.09.20 15:21, Mac wrote:
> That's exactly what shows on this Debian box.
>
> But, under UbuntuStudio I get:
> Bus 003 Device 011: ID 22f0:0014 Allen & Heath ZEDi8
>
> And as you note Qjack shows it as hw:ZEDi8
>
> But, I get no input from it.
>
>
>
> On Wed, Sep 2, 2020 at 9:13 AM Max <abonnements@revolwear.com
> <mailto:abonnements@revolwear.com>> wrote:
>
>     I'm using the ZEDi8 without issues. Shows in QjackCtl as hw:ZEDi8
>     It doesn't appear to have a USB device name at all.
>
>     lsusb just lists it like this:
>
>     Bus 003 Device 011: ID 22f0:0014
>
>     USB vendor ID 22f0 is not listed in any of the databases I searched.
>     Seems Allen&Heath didn't want to pay to register theirs and made one
>     up,
>     an the chipset they bought didn't come with one either..
>
>
>     On 02.09.20 14:43, Mac wrote:
>      > I have installed a fresh Debian 10 and I have Qjackctl installed.
>      >
>      > Qjackctl shows the ZEDi8 (though lsusb does not see it as a ZED,
>     I think
>      > is does on Ubuntu...)
>      >
>      > But, I can't seem to get the config to actually get audio from
>     the ZED,
>      > it appears to be using the onboard sound.
>      >
>      > My web searches have not provided any help...
>      >
>      > _______________________________________________
>      > Linux-audio-user mailing list
>      > Linux-audio-user@lists.linuxaudio.org
>     <mailto:Linux-audio-user@lists.linuxaudio.org>
>      > https://lists.linuxaudio.org/listinfo/linux-audio-user
>      >
>     _______________________________________________
>     Linux-audio-user mailing list
>     Linux-audio-user@lists.linuxaudio.org
>     <mailto:Linux-audio-user@lists.linuxaudio.org>
>     https://lists.linuxaudio.org/listinfo/linux-audio-user
>