Hi Nacho,
Start netjack on both machines as you described in your first post. On the slave machine run the command "alsa_in" in a terminal with your slave's sound card as argument ("alsa_in -d hw:0" if the soundcard you want to use is the first device -  '0' is for the 1st device). this will simply create a jack client for sound card on the slave machine. You can then connect this client in the qjackctl connections window to other clients (in your case probably to 'system' since that is the netjack client on slave).  run "aplay -l" (thats an L) in a terminal to see the the soundcard number (or in qjackctl setup).  run 'man alsa_in' in a terminal to learn more.  hope this helps.

 
www.the-temp-agency.com/lollipopfactory
 

From: Nacho - <nachoen79@hotmail.com
To: tweed <tweed@lollipopfactory.com>
Cc: tweed <tweed@lollipopfactory.com>; "linux-audio-user@lists.linuxaudio.org" <linux-audio-user@lists.linuxaudio.org>
Sent: Sunday, July 28, 2013 4:53 AM
Subject: Re: [LAU] live audio on netjack1

Hi david. The live audio is running on the slave machine. I want receive it on the master but at this moment I can not do it, only works with prerecorded audio or synths.

Thanks!




El 28/07/2013, a las 00:16, "tweed" <davidtweed2003@yahoo.com> escribió:

Hi Nacho,
Which machine (master or slave) has the sound card through which you are running live audio?

 
 

From: Nacho - <nachoen79@hotmail.com>
To: tweed <tweed@lollipopfactory.com>; "linux-audio-user@lists.linuxaudio.org" <linux-audio-user@lists.linuxaudio.org>
Sent: Saturday, July 27, 2013 1:47 PM
Subject: RE: [LAU] live audio on netjack1

Hi David, thanks for the help, but when I change from jack to alsa on the slave machine I can listen only on that slave machine, not in the master.
I don't know what I'm doing wrong.

Date: Fri, 26 Jul 2013 15:14:16 -0700
From: davidtweed2003@yahoo.com
To: linux-audio-user@lists.linuxaudio.org
Subject: Re: [LAU] live audio on netjack1

Hi Nacho, which direction are you trying to send live audio.   master to slave or slave to master?   if slave to master use alsa_in on slave machine to have that audio interface as a jack client.  hope this helps.
 
 

From: Nacho - <nachoen79@hotmail.com>
To: "linux-audio-user@lists.linuxaudio.org" <linux-audio-user@lists.linuxaudio.org>
Sent: Friday, July 26, 2013 12:54 PM
Subject: [LAU] live audio on netjack1

Hi everybody.

I have been doing some test with netcjack1 and jack2, sending audio between two linux pc. I can send audio from one computer to another, but only with synths and prerecorded audio tracks. When I try to use a live audio input, it doesn't works. I'm doing something wrong or it's because I'm using jack with netone? is there any way to do this if possible?

Thanks!

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user



_______________________________________________ Linux-audio-user mailing list Linux-audio-user@lists.linuxaudio.org http://lists.linuxaudio.org/listinfo/linux-audio-user