8 Apr
2013
8 Apr
'13
1:07 a.m.
My jackdbus2 says it is 1.9.9.5. (taken from ~/.log/jack/jackdbus.log)
The release notes say "- Add opus support to NetJack2."
jack_control ip netadapter Shows:
celt: Set CELT encoding and number of kBits per channel
(sint:notset:-1:-1)
Am I mistaken in my understanding that the jacknet2 backend is a part of
jackd? Or does setting "celt" actually now set opus? (the jackd manpage
also uses the word celt)
--
Len Ovens
www.OvenWerks.net
8 Apr
8 Apr
1:47 a.m.
On Sun, Apr 7, 2013 at 7:07 PM, Len Ovens <len(a)ovenwerks.net> wrote:
My jackdbus2 says it is 1.9.9.5. (taken from
~/.log/jack/jackdbus.log)
The release notes say "- Add opus support to NetJack2."
jack_control ip netadapter Shows:
celt: Set CELT encoding and number of kBits per channel
(sint:notset:-1:-1)
Am I mistaken in my understanding that the jacknet2 backend is a part of
jackd? Or does setting "celt" actually now set opus? (the jackd manpage
also uses the word celt)
celt is dead.
opus is its replacement.
netjack2 has been modified to support opus. netjack1 has not.
9 Apr
9 Apr
8:52 a.m.
Quoting Len Ovens <len(a)ovenwerks.net>et>:
My jackdbus2 says it is 1.9.9.5. (taken from
~/.log/jack/jackdbus.log)
The release notes say "- Add opus support to NetJack2."
jack_control ip netadapter Shows:
celt: Set CELT encoding and number of kBits per channel
You probably didn't have opus installed (or didn't have it compiled
with --enable-custom-modes) when you compiled jack-1.9.9.5.
When I run "jack_control ip netadapter" I get
opus: Set Opus encoding and number of kBits per channel (sint:notset:-1:-1)
- Peder
3:37 p.m.
On Mon, April 8, 2013 11:52 pm, Peder Hedlund wrote:
Quoting Len Ovens <len(a)ovenwerks.net>et>:
Ah, so I have a broken jack. libopus is installed. Thank you.
--
Len Ovens
www.OvenWerks.net
My jackdbus2 says it is 1.9.9.5. (taken from
~/.log/jack/jackdbus.log)
The release notes say "- Add opus support to NetJack2."
jack_control ip netadapter Shows:
celt: Set CELT encoding and number of kBits per channel
You probably didn't have opus installed (or didn't have it compiled
with --enable-custom-modes) when you compiled jack-1.9.9.5.
When I run "jack_control ip netadapter" I get
opus: Set Opus encoding and number of kBits per channel
(sint:notset:-1:-1) 
3:45 p.m.
On 04/09/2013 03:37 PM, Len Ovens wrote:
[..]
Ah, so I have a broken jack. libopus is installed.
Thank you.
You do need a version of libopus that was configured/compiled with
--enable-custom-modes
This has been discussed in great length on #opus and #jack and jack-dev
The bottom line was that distributions are not recommended to ship
libopus with this mode enabled - and packagers of jackd are to take care
of it. Adi volunteered to take care of this for the deb package.
best,
robin
11:20 p.m.
On Tue, April 9, 2013 6:45 am, Robin Gareus wrote:
On 04/09/2013 03:37 PM, Len Ovens wrote:
[..]
That twigs something in my memory... One of the mail list archives I think.
Ah, so I have a broken jack. libopus is
installed. Thank you.
You do need a version of libopus that was configured/compiled with
--enable-custom-modes
This has been discussed in great length on #opus and #jack and jack-dev
The bottom line was that distributions are not recommended to ship
libopus with this mode enabled - and packagers of jackd are to take care
of it. Adi volunteered to take care of this for the deb package.
Ah, sounds good. I want to try using it for "broadcast remote
contribution", I think they call it, to replace the SIP
client->pulse->jack (and back) chain. I am finding that my computer is not
powerful enough to handle the extra (de)code as well as the pulse
overhead. There do not seem to be any SIP clients that deal directly with
jackd.
Anyway, I can try it out with CELT till the new version shows up. The cpu
load should be similar.
--
Len Ovens
www.OvenWerks.net
4328
days inactive
4330
days old
linux-audio-user@lists.linuxaudio.org
5 comments
4 participants
participants (4)
-
Len Ovens -
Paul Davis -
Peder Hedlund -
Robin Gareus