Hello Cédric! You could try csound. There is an example included with the full manual. In the online manual entry for hrtfmove and hrtfmove2 you should find examples linked. The way to render a .csd file to disk is by editing, commenting out the -o dac and commenting in the line a little further down, it says something about audio wav-file to disk. If you want to do your own testing read about soundin to read samples from files and probably the linear and exponential controllers line expon to generate your own movement. I hope that helps, if you have further questions about this way of producing binaural spatialisation just ask. Warmly yours Julien 050e010d0f12010401-0405-0d09-030f12011a0f0d- Such Is Life: Very Intensely Adorable; Free And Jubilating Amazement Revels, Dancing On - FLOWERS! ******** Find some music at ******** http://juliencoder.de/nama/music.html --------------------------------------------------------------- "If you live to be 100, I hope I live to be 95 and 37 days, so I can be sure, there's someone at your site, who loves you." (Not Winnie the Puh)

Hello Cédric! I did listen to examples and encorporated it myself in some pieces. The example is quite nice with the phasor (oscillator type) making short sounds. - Wait a minute:I'm thinking of the spat3d opcode. But you can render the output of spat3d to stereo as well. But yes, the hrtf itself is quite OK. Justmake sure you use the newer opcodes and not hrtfer. There are two files to download. They should be included in the downloadable csound manual+examples. I haven't seen them linked directly from the html-documentation. Warm regards Julien 050e010d0f12010401-0405-0d09-030f12011a0f0d- Such Is Life: Very Intensely Adorable; Free And Jubilating Amazement Revels, Dancing On - FLOWERS! ******** Find some music at ******** http://juliencoder.de/nama/music.html --------------------------------------------------------------- "If you live to be 100, I hope I live to be 95 and 37 days, so I can be sure, there's someone at your site, who loves you." (Not Winnie the Puh)

Hi Florian! I don't have anythying handy. but withcsound you can use HRTF or the spat3d family of opcodes to place sources in space. You can generate an impulse - white noise or whatever is best. I seem to remember, that spat3di or spat3dt can generate an IR directly. Otherwise you might use any system of your choosing to place an impulse in space and hook it up to Aliki. So Aliki can pipe its sweepinto your "audio effect" and get the output from it and then calculate the IR for you. I'm sorry, that I can't be more specific right now. Warmly yours Julien 050e010d0f12010401-0405-0d09-030f12011a0f0d- Such Is Life: Very Intensely Adorable; Free And Jubilating Amazement Revels, Dancing On - FLOWERS! ******** Find some music at ******** http://juliencoder.de/nama/music.html --------------------------------------------------------------- "If you live to be 100, I hope I live to be 95 and 37 days, so I can be sure, there's someone at your site, who loves you." (Not Winnie the Puh)

On 28 August 2012 01:49, Robert Vogel <vogel(a)ct.metrocast.net> wrote: i can't directly, but if you're using ubuntu, there will be lots already installed on your computer, in: /usr/share/doc/csound/examples/ i'm sure one of them will include rt midi input -- robin http://fu.ac.nz - Auckland's Free University