14 Feb
2014
14 Feb
'14
11:57 p.m.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Fri, 14 Feb 2014 20:32:29 +0100
raf <rmouneyres(a)gmail.com> wrote:
Hello,
i'd recommend to create a tempo map (vs timestreching which would
lead to artefacts) As you mention recording in ardour, you could use
it to create the tempo map,
hi, what is a "tempo map" and how do you create it in ardour? couldn't
find anything about it. I don't want to manually enter single tempo
changes in ardour
meanwhile I'm looking into klick, it seems it should work (though can't
get it to sync to jack transport ATM) - but this way the tempo changes
will not get recorded into ardour... i.e. every time I press play I
should also somehow start klick...
renato
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAEBAgAGBQJS/p9DAAoJEBz6xFdttjrfu/YH/jL8ab4WU/JFEJBXuymG9Ljs
Ui7nRuwlhMak+cSwsj8ikmDLNkJbdW0TIfsWJEGcNtJIrpSgGPPWUcIP0RNJ3UFC
grcpY8UNROawf6cu7lwcU+3rjDCkepv4BsbR1m4rRTQZawPbzqc4AzeE4AzQMGR0
Whu14iqhA//VO5oD9+Q+KztlxXCtziKlOB0pwegdshwWuby9Y+JABKwwtUg7LMi3
tuu1/XKTbtUXuYoDic/M1Msl3jQuzq8l3Z69Dw2CU8biCeEwsCXT235J7pD3pba8
uc2AHtrA8re6Hgs+3SXs+TzzC7IHbRZGYOmGyxnQm3hTClLWSoDyhXnHoBjALG0=
=SXwS
-----END PGP SIGNATURE-----
15 Feb
15 Feb
10:03 a.m.
New subject: progressive time stretch
Am Freitag, 14. Februar 2014, 23:57:04 schrieb Renato:
On Fri, 14 Feb 2014 20:32:29 +0100
raf <rmouneyres(a)gmail.com> wrote:
I think he means putting several decreasing tempo markers for your accelerando to
ardour's timeline, then re-record hydrogen while both sync to jack transport - then
hydrogen should follow ardour's tempo and there would be no need for
timestretching...
Edgar
Hello,
i'd recommend to create a tempo map (vs timestreching which would
lead to artefacts) As you mention recording in ardour, you could use
it to create the tempo map,
hi, what is a "tempo map" and how do you create it in ardour? couldn't
find anything about it. I don't want to manually enter single tempo
changes in ardour
meanwhile I'm looking into klick, it seems it should work (though can't
get it to sync to jack transport ATM) - but this way the tempo changes
will not get recorded into ardour... i.e. every time I press play I
should also somehow start klick...
renato
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
6:15 p.m.
New subject: progressive time stretch
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Sat, 15 Feb 2014 10:03:07 +0100
Edgar Aichinger <edogawa(a)aon.at> wrote:
Am Freitag, 14. Februar 2014, 23:57:04 schrieb
Renato:
well yeah that was my idea from the start... probably I should have
be more clear (and not use "time stretch" in the subject). The problem
is that manually inputing tempo changes won't give a smooth enough
accelerando, and it's not a very nice way of doing things anyway. I'm
looking for a more automated solution
Does anyone know if the script klick2ardour.py is supposed to work with
ardour 3 sessions? It does nothing to my session
On Fri, 14 Feb 2014 20:32:29 +0100
raf <rmouneyres(a)gmail.com> wrote:
I think he means putting several decreasing tempo markers for your
accelerando to ardour's timeline, then re-record hydrogen while both
sync to jack transport - then hydrogen should follow ardour's tempo
and there would be no need for timestretching...
Hello,
i'd recommend to create a tempo map (vs timestreching which would
lead to artefacts) As you mention recording in ardour, you could
use it to create the tempo map,
hi, what is a "tempo map" and how do you create it in ardour?
couldn't find anything about it. I don't want to manually enter
single tempo changes in ardour
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAEBAgAGBQJS/6CwAAoJEBz6xFdttjrf/vUH/1RaegskCqwXXl0urdCBpUYK
rqGNPu6xolqyP+IIpJejCNEGs1YUz1TEH8J/Ek4ixaqARwXBWQv78lyyvTu2CDj7
XpoqUwidxRaoigbQPhBuVlEys6uw6j95jdIU20jxvQGdPXJx7OqEZv4oaje1XIS/
+ew0wBEE/y2TtePO4uM9BYY75iKqo2GCK8auA6WXpWvkoYHZuI1cRdIXMTHFb7CB
rJNgpb9OkL/OMnVmVr07ZqY9lXTzaVaSSvow8yc9JmOZ3qzFaM6suS4lBQs0+aSK
f4pDItoaLIDNfqpzyfXRM3H/cEPoxl4DWP7PZ9daO0ZCDpbOjl99JKxCZ2o69BI=
=kPeG
-----END PGP SIGNATURE-----
6:28 p.m.
New subject: progressive time stretch
On Sat, 15 Feb 2014 18:15:24 +0100
Renato <rennabh(a)gmail.com> wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Sat, 15 Feb 2014 10:03:07 +0100
Edgar Aichinger <edogawa(a)aon.at> wrote:
Don't know if this is any
help, but in the current version of Rosegarden you
can mark a starting tempo and a finishing tempo and tell it to slowly go from
one to the other. You can go either faster or slower, and set as many markers
as you like.
--
Will J Godfrey
http://www.musically.me.uk
Say you have a poem and I have a tune.
Exchange them and we can both have a poem, a tune, and a song.
Am Freitag, 14. Februar 2014, 23:57:04 schrieb
Renato:
well yeah that was my idea from the start... probably I should have
be more clear (and not use "time stretch" in the subject). The problem
is that manually inputing tempo changes won't give a smooth enough
accelerando, and it's not a very nice way of doing things anyway. I'm
looking for a more automated solution
Does anyone know if the script klick2ardour.py is supposed to work with
ardour 3 sessions? It does nothing to my session On Fri, 14 Feb 2014 20:32:29 +0100
raf <rmouneyres(a)gmail.com> wrote:
I think he means putting several decreasing tempo markers for your
accelerando to ardour's timeline, then re-record hydrogen while both
sync to jack transport - then hydrogen should follow ardour's tempo
and there would be no need for timestretching...
Hello,
i'd recommend to create a tempo map (vs timestreching which would
lead to artefacts) As you mention recording in ardour, you could
use it to create the tempo map,
hi, what is a "tempo map" and how do you create it in ardour?
couldn't find anything about it. I don't want to manually enter
single tempo changes in ardour
11:42 p.m.
New subject: progressive time stretch
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Sat, 15 Feb 2014 17:28:46 +0000
Will Godfrey <willgodfrey(a)musically.me.uk> wrote:
Don't know if this is any help, but in the current
version of
Rosegarden you can mark a starting tempo and a finishing tempo and
tell it to slowly go from one to the other. You can go either faster
or slower, and set as many markers as you like.
Thanks, it's of great help, as ATM it seems the only way I'll have some
success with this :) The trouble is Hydrogen, Ardour and Rosegarden are
all following Jack Transport allright, but I can't see how to declare
Rosegarden as master in the preferences (nor Ardour as slave) -
Hydrogen instead has a "J. Master" button, which is unpressed.
Right now I have a tempo ramp up defined in rosegarden, and as the
transport goes through it I can see the BPMs changing in Rosegarden,
but not in Ardour nor in Hydrogen... and the playback speed remains the
same. The transport though is indeed syncronized (hitting pause pauses
all three programs and so on).
Maybe there were some recent changes to how Jack Transport works? Am
I missing something or is this behaviour indeed strange?
renato
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAEBAgAGBQJS/+1VAAoJEBz6xFdttjrfMk4H/iPQYmyWXkOvgTjcNzx4ExKV
gUiUc2O8W5Z0SUOis35/XW0ixRQzLNz6WcE0BnTUfXQdck/Uaf0t79MuGytT+2Ri
dWsOURED+DUTH2qITC3oqy0PhO1zS5ps/sP4t6RsSD8ZqIIMo9At7u/iv1ZYOzTd
Urer25KDDVqvf1+714FnscG46X4wQZ5nbIhkyvO4KZ73DzHcEuKXfZg+tA+cx2H3
M4MDnzbZdazPBtcf10qdEs5TGdXhnG6mVl23sX7IpW/YN4zqOnhfDFCwEbZrRdJL
kVjPOYQu5VQBxW/8cIHRlLgH0ZDSZOVLEWqqi3mIMm76BQW9NUCAiX6US9a8alg=
=CieA
-----END PGP SIGNATURE-----
11:56 p.m.
New subject: progressive time stretch
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Right now I have a tempo ramp up defined in
rosegarden, and as the
transport goes through it I can see the BPMs changing in Rosegarden,
but not in Ardour nor in Hydrogen... and the playback speed remains
the same. The transport though is indeed syncronized (hitting pause
pauses all three programs and so on).
I actually saw now that play, pause and stop operations are indeed
synchronized, but the transport moves faster in Rosegarden, due to the
tempo ramp up: after that Rosegarden is ahead of the others, and its
tranpsport is moving faster.
Is this a bug somewhere?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAEBAgAGBQJS//CiAAoJEBz6xFdttjrfCdYH/3Q/VfzhIzPIupRgOnRSW3I7
QajIrfpgQ/BPoOXS8ozgPpP8c/lQ8fjY+VgyR3+1zVDYOZVsl1xJtvp4xwmuYL7y
GZSQ5necbktzOAmhchsDci+26Oz1S+BwCpJjqAHhibcVgHiTd+7Kb2ga1fA1viNc
fjGQIGiVgsKWtfSCPwoDJ4YjkL1kKc6wk+boAz1FKP9r+cPCvCsjSu1o6mRMYQ6X
b0Mb57Urwjfypx3HC84YfYwCKW3dmuqg9bLOUM4GfM1zWuhImjHbz2x/jWZHcO5o
DfC3tdNUV/EU0vT9AIUVYL9zFLHUYLF0zDayiaYpEZECDMDRqv3uLRNNGZAy7Hk=
=O4uD
-----END PGP SIGNATURE-----
16 Feb
16 Feb
2:18 a.m.
New subject: progressive time stretch
On Sat, Feb 15, 2014 at 5:42 PM, Renato <rennabh(a)gmail.com> wrote:
----but I can't see how to declare
Rosegarden as master in the preferences (nor Ardour as slave) -
Session > Properties > Sync .... choose the external clock source
Then use the clock source button just right of the transport buttons to
switch between the internal clock and the chosen external clock source.
Right now I have a tempo ramp up defined in
rosegarden, and as the
transport goes through it I can see the BPMs changing in Rosegarden,
but not in Ardour nor in Hydrogen...
ardour does not pay any attention to JACK tempo information.
2:29 p.m.
New subject: progressive time stretch
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Sat, 15 Feb 2014 20:18:53 -0500
Paul Davis <paul(a)linuxaudiosystems.com> wrote:
On Sat, Feb 15, 2014 at 5:42 PM, Renato
<rennabh(a)gmail.com> wrote:
Hi, thanks; isn't it strange to have it there and not in the Transport
tab in Preferences, where all the other sync options are?
Last night after lot of cursing I finally did manage to do what I was
after, with Ardour and klick. The two things I was doing wrong were
having Ardour set as Jack Master (because I was looking for that option
in the Preferences) and not understanding how klick works. Basically,
if you have a tempo map file like this
firstpart: 10 120
secondpart: 2 120
4 120-135
lastpart: 10 135
you just have to run "klick -T -f tempo_map_file" and, whenever in
hydrogen (for example) you'll move the playhead to measure 13, it will
start ramping up the tempo to 135 in 4 measures. My misunderstanding
was that it would start counting measures from the moment you executed
the klick command, instead like this of course it's much better, you
can even put that command in your non-session and forget about it
thanks to all that helped me :=)
renato
----but I can't see how to declare
Rosegarden as master in the preferences (nor Ardour as slave) -
Session > Properties > Sync .... choose the external clock source
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAEBAgAGBQJTAL1IAAoJEBz6xFdttjrfke4IAJJkxXNtoZkEA8vEEzpQgiQL
y16e22QpaaICeRplqNu7p5/N850SgOVqTOESBMSaa5BTJuQTr2cUskHOA+3HScUv
GnbKy4e6MQp2j2OSt3NLXbpWmXaD9IXXQ4VRpPjvhQXElYW4VJXAev5vz/kIih7I
FxkUzUbgez9mgcxeQRDafa5x3UptHix6hzGQ7DyPfV8TVPWTGWVzJboLJprT6i0x
/S1tuhnrWbClYrWP+Q7rxltBV9T0voIy6OY4CSwzTZRAEfiagl/jdiAEFYpRXqpy
xdLh2W5UsLS5y0f6B5KipkGFDWpZOoq6T5nhb9zn6leEOwkJFi8rH9bFz4/+uMo=
=Gtnt
-----END PGP SIGNATURE-----
3:06 p.m.
New subject: progressive time stretch
On Sun, Feb 16, 2014 at 8:29 AM, Renato <rennabh(a)gmail.com> wrote:
the choice of external clock is considered to be session specific, not
global to ardour. in some sessions you might sync to LTC, on others to MTC,
on others to JACK and on others just use the internal clock. thus, it is
not a global preference and so (like all other session properties) it lives
in Session > Properties, not in Edit > Preferences.
--p
Session > Properties > Sync .... choose
the external clock source
Hi, thanks; isn't it strange to have it there and not in the Transport
tab in Preferences, where all the other sync options are?
3745
days inactive
3747
days old
linux-audio-user@lists.linuxaudio.org
8 comments
4 participants
participants (4)
-
Edgar Aichinger -
Paul Davis -
Renato -
Will Godfrey