25 Nov
2005
25 Nov
'05
4:35 a.m.
http://www.notam02.no/arkiv/src/
ABOUT
-----
jack_capture is a small simple program to capture whatever
sound is going out to your speakers into a file.
This is the program I always wanted to have for jack, but no
one made. So here it is.
USAGE
-----
jack_capture [-f filename] [ -b bitdepth ] [-c channels] [ -B bufsize ]
Filename is by default auotogenerated to something like
"jack_capture_<date+exact_time>.wav"
Bitdepth is by default FLOAT.
Channels is by default 2.
Bufsize is by default 262144.
ACKNOWLEDGMENT
--------------
Mostly based on the jackrec program in the jack distribution
made by Paul Davies and Jack O'Quin. Automatic filename generation
code taken from the timemachine program by Steve Harries.
--
25 Nov
25 Nov
5:20 a.m.
On Fri, 25 Nov, 2005 at 12:34AM -0800, Kjetil S. Matheussen spake thus:
I normally use timemachine for recording like this - how does this
differ?
Oh, and the one thing that timemachine always annoys me with is it's
aparrent inability to write files that can be read by anything except
audacity. Does this do better?
Thanks for the software,
James
ABOUT
jack_capture is a small simple program to capture whatever
sound is going out to your speakers into a file.
This is the program I always wanted to have for jack, but no
one made. So here it is.
USAGE
jack_capture [-f filename] [ -b bitdepth ] [-c channels] [ -B bufsize ]
Filename is by default auotogenerated to something like
"jack_capture_<date+exact_time>.wav"
Bitdepth is by default FLOAT.
Channels is by default 2.
Bufsize is by default 262144.
ACKNOWLEDGMENT
Mostly based on the jackrec program in the jack distribution
made by Paul Davies and Jack O'Quin. Automatic filename generation
code taken from the timemachine program by Steve Harries.
--
"I'd crawl over an acre of 'Visual This++' and 'Integrated
Development
That' to get to gcc, Emacs, and gdb. Thank you."
(By Vance Petree, Virginia Power)
6:31 a.m.
On Fri, 25 Nov 2005 09:09:23 +0000
james(a)dis-dot-dat.net wrote:
On Fri, 25 Nov, 2005 at 12:34AM -0800, Kjetil S.
Matheussen spake thus:
I normally use timemachine for recording like this - how does this
differ?
Oh, and the one thing that timemachine always annoys me with is it's
aparrent inability to write files that can be read by anything except
audacity. Does this do better?
Which can be remedied by reading the timemachine documentation (SCNR):
----snip
~$ timemachine -h
Usage timemachine: [-h] [-i] [-c channels] [-n jack-name]
[-t buffer-length] [-p file prefix] [-f format] [port-name ...]
-h show this help
-i interactive mode (console instead of X11) also enabled
if DISPLAY is unset
-c specify number of recording channels
-n specify the JACK name timemachine will use
-t specify the pre-recording buffer length
-p specify the saved file prefix, may include path
-f specify the saved file format
channels must be in the range 1-8, default 2
jack-name, default "TimeMachine"
file-prefix, default "tm-"
buffer-length, default 10 secs
format, default 'w64', options: wav, w64
specifying port names to connect to on the command line overrides -c
---- snap
Flo
--
Palimm Palimm!
http://tapas.affenbande.org
10:04 a.m.
On Friday 25 November 2005 10:28, Florian Schmidt was like:
On Fri, 25 Nov 2005 09:09:23 +0000
james(a)dis-dot-dat.net wrote:
Exactly.
I rather like timemachine, precisely because I can make .wavs with it that I
can drop straight into ardour without any mucking about.
--
cheers,
tim hall
http://glastonburymusic.org.uk/tim
On Fri, 25 Nov, 2005 at 12:34AM -0800, Kjetil S.
Matheussen spake thus:
I normally use timemachine for recording like this - how does this
differ?
Oh, and the one thing that timemachine always annoys me with is it's
aparrent inability to write files that can be read by anything except
audacity. Does this do better?
Which can be remedied by reading the timemachine documentation (SCNR):
----snip
~$ timemachine -h
Usage timemachine: [-h] [-i] [-c channels] [-n jack-name]
[-t buffer-length] [-p file prefix] [-f format] [port-name ...]
-h show this help
-i interactive mode (console instead of X11) also enabled
if DISPLAY is unset
-c specify number of recording channels
-n specify the JACK name timemachine will use
-t specify the pre-recording buffer length
-p specify the saved file prefix, may include path
-f specify the saved file format
channels must be in the range 1-8, default 2
jack-name, default "TimeMachine"
file-prefix, default "tm-"
buffer-length, default 10 secs
format, default 'w64', options: wav, w64
specifying port names to connect to on the command line overrides -c
---- snap 
10:28 a.m.
New subject: [linux-audio-user] Re: jack_capture v0.0.1
On 11/25/05, tim hall <tech(a)glastonburymusic.org.uk> wrote:
On Friday 25 November 2005 10:28, Florian Schmidt was
like:
If you all used a halfway recent ardour and libsndfile you could just
drop the w64's into ardour... and you can use sndfile-convert to
convert the w64 to any wave-like format you want...
Arnold
--
visit http://dillenburg.dyndns.org/~arnold/
---
Wenn man mit Raubkopien Bands wie Brosis oder Britney Spears wirklich
verhindern könnte, würde ich mir noch heute einen Stapel Brenner und
einen Sack Rohlinge kaufen.
On Fri, 25 Nov 2005 09:09:23 +0000
james(a)dis-dot-dat.net wrote:
Exactly.
I rather like timemachine, precisely because I can make .wavs with it that I
can drop straight into ardour without any mucking about. I normally use timemachine for recording like
this - how does this
differ?
Oh, and the one thing that timemachine always annoys me with is it's
aparrent inability to write files that can be read by anything except
audacity. Does this do better?
Which can be remedied by reading the timemachine
documentation (SCNR):
10:41 a.m.
New subject: [linux-audio-user] Re: jack_capture v0.0.1
On Friday 25 November 2005 14:28, Arnold Krille was like:
If you all used a halfway recent ardour and libsndfile
you could just
drop the w64's into ardour... and you can use sndfile-convert to
convert the w64 to any wave-like format you want...
Thanks for that tip Arnold. I'm still using the version of Ardour that ships
with DeMuDi stable (beta29 - v. old) When I have time to mess around again, I
may look at starting to use CVS versions of Ardour and Rosegarden. For now, I
am happy because I am Actually Making Music. :) Results to be released soon.
--
cheers,
tim hall
http://glastonburymusic.org.uk/tim
11:15 a.m.
New subject: [linux-audio-user] Re: jack_capture v0.0.1
On 11/25/05, tim hall <tech(a)glastonburymusic.org.uk> wrote:
Thanks for that tip Arnold. I'm still using the
version of Ardour that ships
with DeMuDi stable (beta29 - v. old) When I have time to mess around again,
I may look at starting to use CVS versions of Ardour and Rosegarden. For now,
I am happy because I am Actually Making Music. :) Results to be released
soon.
Actually its the libsndfile-version that makes the difference(*). But
if you recompile this, you can also install a new ardour...
Arnold
(*) I have forgotten the exact version when this was fixed, gentoo
updates are to smooth...
--
visit http://dillenburg.dyndns.org/~arnold/
---
Wenn man mit Raubkopien Bands wie Brosis oder Britney Spears wirklich
verhindern könnte, würde ich mir noch heute einen Stapel Brenner und
einen Sack Rohlinge kaufen.
3 Feb
3 Feb
1:19 a.m.
New subject: [linux-audio-user] [ANN] jack_capture v0.2.0 (Re: [ANN] jack_capture v0.0.1)
http://ccrma.stanford.edu/~kjetil/src/
CHANGES
0.1.1 -> 0.2.0:
*Automatically disconnect and connect ports while program is running.
Previously, the
connections where only set up when the program started.
*Added make install.
*Various smaller changes.
On Fri, 25 Nov 2005, Kjetil S. Matheussen wrote:
http://www.notam02.no/arkiv/src/
ABOUT
-----
jack_capture is a small simple program to capture whatever
sound is going out to your speakers into a file.
This is the program I always wanted to have for jack, but no
one made. So here it is.
USAGE
-----
jack_capture [-f filename] [ -b bitdepth ] [-c channels] [ -B bufsize ]
Filename is by default auotogenerated to something like
"jack_capture_<date+exact_time>.wav"
Bitdepth is by default FLOAT.
Channels is by default 2.
Bufsize is by default 262144.
ACKNOWLEDGMENT
--------------
Mostly based on the jackrec program in the jack distribution
made by Paul Davies and Jack O'Quin. Automatic filename generation
code taken from the timemachine program by Steve Harries.
2:36 p.m.
New subject: [linux-audio-user] [Jackit-devel] [ANN] jack_capture v0.2.0 (Re: [ANN] jack_capture v0.0.1)
Kjetil S. Matheussen wrote:
http://ccrma.stanford.edu/~kjetil/src/
CHANGES
0.1.1 -> 0.2.0:
*Automatically disconnect and connect ports while program is running.
Previously, the
connections where only set up when the program started.
*Added make install.
*Various smaller changes.
On Fri, 25 Nov 2005, Kjetil S. Matheussen wrote:
line 371:
char *optstring = "d:c:b:B:h";
'd' should have been 'f'. Sorry, I already found this when got v0.1.1
and forgot to write you. :-)
c.
--
www.cesaremarilungo.com
http://www.notam02.no/arkiv/src/
ABOUT
-----
jack_capture is a small simple program to capture whatever
sound is going out to your speakers into a file.
This is the program I always wanted to have for jack, but no
one made. So here it is.
USAGE
-----
jack_capture [-f filename] [ -b bitdepth ] [-c channels] [ -B bufsize ]
Filename is by default auotogenerated to something like
"jack_capture_<date+exact_time>.wav"
Bitdepth is by default FLOAT.
Channels is by default 2.
Bufsize is by default 262144.
ACKNOWLEDGMENT
--------------
Mostly based on the jackrec program in the jack distribution
made by Paul Davies and Jack O'Quin. Automatic filename generation
code taken from the timemachine program by Steve Harries.
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log
files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&d…
_______________________________________________
Jackit-devel mailing list
Jackit-devel(a)lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/jackit-devel
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager. This message contains confidential information and
is intended only for the individual named. If you are not the named
addressee you should not disseminate, distribute or copy this e-mail.
7:51 p.m.
New subject: [linux-audio-user] [ANN] jack_capture v0.2.1
Cesare Marilungo wrote:
line 371:
char *optstring = "d:c:b:B:h";
'd' should have been 'f'. Sorry, I already found this when got v0.1.1
and forgot to write you. :-)
Thanks! New version is up at http://ccrma.stanford.edu/~kjetil/src/
0.2.0 -> 0.2.1:
* Removed optional -f argument (that didn't work anyway) for setting the
filename. Usage for program is now:
"jack_capture [ -b bitdepth ] [-c channels] [ -B bufsize ] [filename]"
Thanks to Cesare Marilungo for pointing out the bug.
* Sound filename is also printed to the screen.
8:48 p.m.
New subject: [linux-audio-user] [Jackit-devel] [ANN] jack_capture v0.2.1
Kjetil S. Matheussen wrote:
Cesare Marilungo wrote:
Now you deleted the 'd' but didn't replace with 'f'.
Are you doing it on purpose? :-)
Should be:
char *optstring = "f:c:b:B:h";
Now it is:
char *optstring = "c:b:B:h";
c.
--
www.cesaremarilungo.com
line 371:
char *optstring = "d:c:b:B:h";
'd' should have been 'f'. Sorry, I already found this when got v0.1.1
and forgot to write you. :-)
Thanks! New version is up at http://ccrma.stanford.edu/~kjetil/src/
0.2.0 -> 0.2.1:
* Removed optional -f argument (that didn't work anyway) for setting the
filename. Usage for program is now:
"jack_capture [ -b bitdepth ] [-c channels] [ -B bufsize ] [filename]"
Thanks to Cesare Marilungo for pointing out the bug.
* Sound filename is also printed to the screen.
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log
files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&d…
_______________________________________________
Jackit-devel mailing list
Jackit-devel(a)lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/jackit-devel
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager. This message contains confidential information and
is intended only for the individual named. If you are not the named
addressee you should not disseminate, distribute or copy this e-mail.
8:53 p.m.
New subject: [linux-audio-user] [Jackit-devel] [ANN] jack_capture v0.2.1
Cesare Marilungo wrote:
Kjetil S. Matheussen wrote:
Sorry I didn't read the whole msg. But if you use the string above
("f:c:b:B:h") it *does* works, as it already does using the extended
version of this option ('--file').
c.
--
www.cesaremarilungo.com
Cesare Marilungo wrote:
Now you deleted the 'd' but didn't replace with 'f'.
Are you doing it on purpose? :-)
Should be:
char *optstring = "f:c:b:B:h";
Now it is:
char *optstring = "c:b:B:h";
c. line 371:
char *optstring = "d:c:b:B:h";
'd' should have been 'f'. Sorry, I already found this when got v0.1.1
and forgot to write you. :-)
Thanks! New version is up at http://ccrma.stanford.edu/~kjetil/src/
0.2.0 -> 0.2.1:
* Removed optional -f argument (that didn't work anyway) for setting
the
filename. Usage for program is now:
"jack_capture [ -b bitdepth ] [-c channels] [ -B bufsize ]
[filename]"
Thanks to Cesare Marilungo for pointing out the bug.
* Sound filename is also printed to the screen.
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through
log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&d…
_______________________________________________
Jackit-devel mailing list
Jackit-devel(a)lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/jackit-devel
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager. This message contains confidential information
and is intended only for the individual named. If you are not the
named addressee you should not disseminate, distribute or copy this
e-mail.
5 Feb
5 Feb
6:56 p.m.
New subject: [linux-audio-user] [ANN] jack_capture v0.2.2
(Sorry for all the double-postings. I have no idea why that happens.)
ABOUT
-----
jack_capture is a small simple program to capture whatever
sound is going out to your speakers into a file.
This is the program I always wanted to have for jack, but no
one made. So here it is.
CHANGES
-------
0.2.1 -> 0.2.2:
*Only connect/disconnect ports if its necessary. This puts less stress on the jack
system
and avoids possible never ending connect/reconnecting loops.
*Replaced the timemachine-way of automatically setting filename by a much simpler one.
Now the
autogenerated filename is just jack_capture_<n>.wav: jack_capture_1.wav,
jack_capture_2.wav,
jack_capture_3.wav and so on.
*If jack is shut down during recording, stop the recording properly.
*Various smaller changes.
http://ccrma.stanford.edu/~kjetism/src/
8:37 p.m.
New subject: [linux-audio-user] [ANN] jack_capture v0.2.2
Kjetil S. Matheussen wrote:
(Sorry for all the double-postings. I have no idea why that happens.)
ABOUT
-----
jack_capture is a small simple program to capture whatever
sound is going out to your speakers into a file.
This is the program I always wanted to have for jack, but no
one made. So here it is.
CHANGES
-------
0.2.1 -> 0.2.2:
*Only connect/disconnect ports if its necessary. This puts less
stress on the jack system
and avoids possible never ending connect/reconnecting loops.
*Replaced the timemachine-way of automatically setting filename by a
much simpler one. Now the
autogenerated filename is just jack_capture_<n>.wav:
jack_capture_1.wav, jack_capture_2.wav,
jack_capture_3.wav and so on.
*If jack is shut down during recording, stop the recording properly.
*Various smaller changes.
http://ccrma.stanford.edu/~kjetism/src/
Please! :-)
Explain me why have you removed the option to choose the filename? It
worked and it was useful.
c.
--
www.cesaremarilungo.com
6790
days inactive
6862
days old
linux-audio-user@lists.linuxaudio.org
13 comments
6 participants
participants (6)
-
Arnold Krille -
Cesare Marilungo -
Florian Schmidt -
james＠dis-dot-dat.net -
Kjetil S. Matheussen -
tim hall