2 May
2009
2 May
'09
9:19 p.m.
I used to put up with an occasional xrun with the older kernels. But I'm writing to
report that I just installed 2.6.29.1-RT4 from CCRMA on Fedora 10 and I didn't see a
single xrun. In case anyone is interested, I record 12 simultaneous mic'd inputs from
an Echo AudioFire12 to a Dell XPS laptop:
Dell XPS M1210 laptop
1GB RAM
Intel T5600 1.8GHz Core2Duo
Intel 945GM Video controller
Sigmatel 9220 internal audio controller
Internal Ricoh Co Ltd R5C832 IEEE 1394 Controller
http://tinyurl.com/clr43l
Echo Audio Audiofire12
http://www.echoaudio.com/Products/FireWire/AudioFire12/index.php
Thanks to the kernel team for making such an awesome product!
-Scott
3 May
3 May
6:06 a.m.
2009/5/3 Scott <lau(a)troutpocket.org>
I used to put up with an occasional xrun with the
older kernels. But I'm
writing to
report that I just installed 2.6.29.1-RT4 from CCRMA on Fedora 10 and I
didn't see a
single xrun. In case anyone is interested, I record 12 simultaneous mic'd
inputs from
an Echo AudioFire12 to a Dell XPS laptop:
Dell XPS M1210 laptop
1GB RAM
Intel T5600 1.8GHz Core2Duo
Intel 945GM Video controller
Sigmatel 9220 internal audio controller
Internal Ricoh Co Ltd R5C832 IEEE 1394 Controller
http://tinyurl.com/clr43l
Echo Audio Audiofire12
http://www.echoaudio.com/Products/FireWire/AudioFire12/index.php
Thanks to the kernel team for making such an awesome product!
-Scott
+1
The only problem was the iwl4965 module which was missing dbg related one on
default 2.6.29.2 config.
For debian users: I must say that make-kpkg doesn't generate initrd
(--initrd option) with linux-2.6.29.2 sources so I had to create one with
update-initramfs and then add the following line to menu.lst in /boot/grub
dir.
initrd /boot/initrd.img-2.6.29.2-rt10
I am currently switching to 2.6.29.2-rt11.
regards
-r
7:08 a.m.
On Sun, May 03, 2009 at 10:06:49AM +0200, Raffaele Morelli wrote:
For debian users: I must say that make-kpkg
doesn't generate initrd
(--initrd option) with linux-2.6.29.2 sources so I had to create one with
update-initramfs and then add the following line to menu.lst in /boot/grub
dir.
initrd /boot/initrd.img-2.6.29.2-rt10
I am currently switching to 2.6.29.2-rt11.
This is caused by a recent update of the make-kpkg package. Have a look
at /usr/share/doc/kernel-package/NEWS.Debian.gz and the updated
/usr/share/doc/kernel-package/README.gz:
"Also, make sure you have configured /etc/kernel-img.conf and also
/etc/kernel/*.d by dropping in the correct scripts there. (symlink
creation, initramfs generation, running boot loaders, etc)"
The good thing about this change is that you now can skip the 'make-kpkg
clean' part after having reconfigured your kernel. Just remove the
debian sub-directory and enjoy the fact that, finally, make can be used
as it is supposed to.
By the way, I also followed the 2.6.29 line and just built 2.6.29.2-rt10
myself. I have to switch off wireless LAN but apart from that it works
really well.
Jan
5:08 p.m.
2009/5/3 Jan Weil <jan.weil(a)web.de>
On Sun, May 03, 2009 at 10:06:49AM +0200, Raffaele
Morelli wrote:
thank you.
My wireless card is working now on 2.6.29.2-rt11, kernel module for my
wireless controller has changed, it was iwl4965 now is iwlagn.
"Intel Wireless WiFi 4965AGN" was not selected in "Wireless Lan"
kernel
sources section
Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron]
Network Connection (rev 61)
Kernel driver in use: iwlagn
regards
-r
For debian users: I must say that make-kpkg
doesn't generate initrd
(--initrd option) with linux-2.6.29.2 sources so I had to create one with
update-initramfs and then add the following line to menu.lst in
/boot/grub
dir.
initrd /boot/initrd.img-2.6.29.2-rt10
I am currently switching to 2.6.29.2-rt11.
This is caused by a recent update of the make-kpkg package. Have a look
at /usr/share/doc/kernel-package/NEWS.Debian.gz and the updated
/usr/share/doc/kernel-package/README.gz:
"Also, make sure you have configured /etc/kernel-img.conf and also
/etc/kernel/*.d by dropping in the correct scripts there. (symlink
creation, initramfs generation, running boot loaders, etc)"
The good thing about this change is that you now can skip the 'make-kpkg
clean' part after having reconfigured your kernel. Just remove the
debian sub-directory and enjoy the fact that, finally, make can be used
as it is supposed to.
By the way, I also followed the 2.6.29 line and just built 2.6.29.2-rt10
myself. I have to switch off wireless LAN but apart from that it works
really well.
Jan
5492
days inactive
5493
days old
linux-audio-user@lists.linuxaudio.org
3 comments
3 participants
participants (3)
-
Jan Weil -
Raffaele Morelli -
Scott