17 Dec
2003
17 Dec
'03
9:49 p.m.
Hi all,
Has anyone else been having USB audio device problems with the 2.6.0-test kernels?
I have the ALSA USB audio driver enabled, as well as the normal USB audio device driver
(in the USB section).
On plugging on the device i get the output below.
If i then try and use the /dev/dsp device supplied, the app trying to play to it locks up
(even a kill -9 wont make it go away).
The USB device is based on the texas instruments PCM2902.
Here is the dmesg dump:
hub 1-0:1.0: new USB device on port 1, assigned address 2
usbaudio: device 2 audiocontrol interface 0 has 1 input and 1 output AudioStreaming
interfaces
usbaudio: valid input sample rate 48000
usbaudio: device 2 interface 2 altsetting 1: format 0x80000010 sratelo 48000 sratehi 48000
attributes 0x00
usbaudio: valid input sample rate 48000
usbaudio: device 2 interface 2 altsetting 2: format 0x00000010 sratelo 48000 sratehi 48000
attributes 0x00
usbaudio: valid input sample rate 44100
usbaudio: device 2 interface 2 altsetting 3: format 0x80000010 sratelo 44100 sratehi 44100
attributes 0x00
usbaudio: valid input sample rate 44100
usbaudio: device 2 interface 2 altsetting 4: format 0x00000010 sratelo 44100 sratehi 44100
attributes 0x00
usbaudio: valid input sample rate 32000
usbaudio: device 2 interface 2 altsetting 5: format 0x80000010 sratelo 32000 sratehi 32000
attributes 0x00
usbaudio: valid input sample rate 32000
usbaudio: device 2 interface 2 altsetting 6: format 0x00000010 sratelo 32000 sratehi 32000
attributes 0x00
usbaudio: valid input sample rate 22050
usbaudio: device 2 interface 2 altsetting 7: format 0x80000010 sratelo 22050 sratehi 22050
attributes 0x00
usbaudio: valid input sample rate 22050
usbaudio: device 2 interface 2 altsetting 8: format 0x00000010 sratelo 22050 sratehi 22050
attributes 0x00
usbaudio: valid input sample rate 16000
usbaudio: device 2 interface 2 altsetting 9: format 0x80000010 sratelo 16000 sratehi 16000
attributes 0x00
usbaudio: valid input sample rate 16000
usbaudio: device 2 interface 2 altsetting 10: format 0x00000010 sratelo 16000 sratehi
16000 attributes 0x00
usbaudio: valid input sample rate 16000
usbaudio: device 2 interface 2 altsetting 11: format 0x80000040 sratelo 16000 sratehi
16000 attributes 0x00
usbaudio: valid input sample rate 16000
usbaudio: device 2 interface 2 altsetting 12: format 0x00000040 sratelo 16000 sratehi
16000 attributes 0x00
usbaudio: valid input sample rate 8000
usbaudio: device 2 interface 2 altsetting 13: format 0x80000040 sratelo 8000 sratehi 8000
attributes 0x00
usbaudio: valid input sample rate 8000
usbaudio: device 2 interface 2 altsetting 14: format 0x00000040 sratelo 8000 sratehi 8000
attributes 0x00
usbaudio: valid input sample rate 11025
usbaudio: device 2 interface 2 altsetting 15: format 0x80000010 sratelo 11025 sratehi
11025 attributes 0x00
usbaudio: valid input sample rate 11025
usbaudio: device 2 interface 2 altsetting 16: format 0x00000010 sratelo 11025 sratehi
11025 attributes 0x00
usbaudio: valid input sample rate 11025
usbaudio: device 2 interface 2 altsetting 17: format 0x80000040 sratelo 11025 sratehi
11025 attributes 0x00
usbaudio: valid input sample rate 11025
usbaudio: device 2 interface 2 altsetting 18: format 0x00000040 sratelo 11025 sratehi
11025 attributes 0x00
usbaudio: valid output sample rate 32000
usbaudio: valid output sample rate 48000
usbaudio: valid output sample rate 44100
usbaudio: device 2 interface 1 altsetting 1: format 0x80000010 sratelo 32000 sratehi 48000
attributes 0x00
usbaudio: valid output sample rate 32000
usbaudio: valid output sample rate 48000
usbaudio: valid output sample rate 44100
usbaudio: device 2 interface 1 altsetting 2: format 0x00000010 sratelo 32000 sratehi 48000
attributes 0x00
usbaudio: valid output sample rate 32000
usbaudio: valid output sample rate 48000
usbaudio: valid output sample rate 44100
usbaudio: device 2 interface 1 altsetting 3: format 0x80000040 sratelo 32000 sratehi 48000
attributes 0x00
usbaudio: valid output sample rate 32000
usbaudio: valid output sample rate 48000
usbaudio: valid output sample rate 44100
usbaudio: device 2 interface 1 altsetting 4: format 0x00000040 sratelo 32000 sratehi 48000
attributes 0x00
usbaudio: valid output sample rate 32000
usbaudio: valid output sample rate 48000
usbaudio: valid output sample rate 44100
usbaudio: device 2 interface 1 altsetting 5: format 0x80000008 sratelo 32000 sratehi 48000
attributes 0x00
usbaudio: valid output sample rate 32000
usbaudio: valid output sample rate 48000
usbaudio: valid output sample rate 44100
usbaudio: device 2 interface 1 altsetting 6: format 0x00000008 sratelo 32000 sratehi 48000
attributes 0x00
usbaudio: registered dsp 14,3
usbaudio: constructing mixer for Terminal 2 type 0x0301
usbaudio: registered mixer 14,0
usbaudio: constructing mixer for Terminal 5 type 0x0101
usbaudio: no mixer controls found for Terminal 5
usb_audio_parsecontrol: usb_audio_state at cbfbd4e0
drivers/usb/input/hid-core.c: ctrl urb status -75 received
usb 1-1: control timeout on ep0out
Thanks for any help.
17 Dec
17 Dec
10:12 p.m.
Hallo,
Mark Williams (MWP) hat gesagt: // Mark Williams (MWP) wrote:
Has anyone else been having USB audio device problems
with the
2.6.0-test kernels? I have the ALSA USB audio driver enabled, as
well as the normal USB audio device driver (in the USB section).
You should only select on driver: the ALSA one which is the default.
The module later will be called snd-usb-audio
The USB device is based on the texas instruments
PCM2902.
Here is the dmesg dump:
hub 1-0:1.0: new USB device on port 1, assigned address 2
usbaudio: device 2 audiocontrol interface 0 has 1 input and 1 output AudioStreaming
interfaces
^^^^^^^^^
This probably is the OSS driver. You'll have to decide which one you
want to use.
ciao
--
Frank Barknecht _ ______footils.org__
18 Dec
18 Dec
2:03 a.m.
Has anyone
else been having USB audio device problems with the
2.6.0-test kernels? I have the ALSA USB audio driver enabled, as
well as the normal USB audio device driver (in the USB section).
You should only select on driver: the ALSA one which is the default.
The module later will be called snd-usb-audio
The USB device is based on the texas instruments
PCM2902.
Here is the dmesg dump:
hub 1-0:1.0: new USB device on port 1, assigned address 2
usbaudio: device 2 audiocontrol interface 0 has 1 input and 1 output AudioStreaming
interfaces
^^^^^^^^^
This probably is the OSS driver. You'll have to decide which one you
want to use.
6:18 a.m.
Hallo,
Mark Williams (MWP) hat gesagt: // Mark Williams (MWP) wrote:
Ok, i un-selected the "USB Audio Driver" in
the USB devices menu,
and left the ALSA USB driver turned on. After a recompile, reboot,
im still having the same problems :(
Well, then we need the usual:
* How exactly do you try to play sound?
* What does your modules-configuration look like?
* Did you try with aplay?
* Does your card show up in /proc/asound/cards or wherever such things are shown
on 2.6?
* maybe more info.
ciao
--
Frank Barknecht _ ______footils.org__
1:11 p.m.
Hallo,
Mark Williams (MWP) hat gesagt: // Mark Williams (MWP) wrote:
Ok.
Im now using the final 2.6.0 kernel.
Problem is still there though.
Ok, i un-selected the "USB Audio
Driver" in the USB devices menu,
and left the ALSA USB driver turned on. After a recompile, reboot,
im still having the same problems :(
Well, then we need the usual: * How exactly do you try to play sound?
ogg123, mpg123.
I dont have X installed.
* What does your modules-configuration look like?
Dont have any, all compiled into the kernel.
* Did you try with aplay?
Yep, same problem.
* Does your card show up in /proc/asound/cards or
wherever such things are shown
on 2.6?
Im complied for OSS USB sound ATM, so i cant list the info now.
Ill reply again after a recompile with ALSA USB.
* maybe more info.
Um, the only thing i can think of thats relivant is that the motherboard is a Asus P3V4X.
1:32 p.m.
Ok, more info.
In the kernel:
USB support -> USB Audio support = off
Sound -> ALSA -> ALSA USB devices -> USB Audio/MIDI driver = on
On plugging in the device, dmesg says:
hub 1-0:1.0: new USB device on port 2, assigned address 2
drivers/usb/input/hid-core.c: ctrl urb status -75 received
usb 1-2: control timeout on ep0out
cat /proc/asound/cards:
0 [default ]: USB-Audio - USB Audio CODEC
Burr-Brown from TI USB Audio CODEC at
usb-0000:00:04.2-2
cat /proc/asound/card0/pcm0p/info:
card: 0
device: 0
subdevice: 0
stream: PLAYBACK
id: USB Audio
name: USB Audio
subname: subdevice #0
class: 0
subclass: 0
subdevices_count: 1
subdevices_avail: 1
Any other info that would help?
Thanks.
Hallo,
Mark Williams (MWP) hat gesagt: // Mark Williams (MWP) wrote:
Ok.
Im now using the final 2.6.0 kernel.
Problem is still there though.
Ok, i un-selected the "USB Audio
Driver" in the USB devices menu,
and left the ALSA USB driver turned on. After a recompile, reboot,
im still having the same problems :(
Well, then we need the usual: * How exactly do you try to play sound?
ogg123, mpg123.
I dont have X installed.
* What does your modules-configuration look like?
Dont have any, all compiled into the kernel.
* Did you try with aplay?
Yep, same problem.
* Does your card show up in /proc/asound/cards or
wherever such things are shown
on 2.6?
Im complied for OSS USB sound ATM, so i cant list the info now.
Ill reply again after a recompile with ALSA USB.
* maybe more info.
Um, the only thing i can think of thats relivant is that the motherboard is a Asus P3V4X.
2:17 p.m.
Mark Williams (MWP) wrote:
USB support -> USB Audio support = off
Sound -> ALSA -> ALSA USB devices -> USB Audio/MIDI driver = on
On plugging in the device, dmesg says:
hub 1-0:1.0: new USB device on port 2, assigned address 2
drivers/usb/input/hid-core.c: ctrl urb status -75 received
usb 1-2: control timeout on ep0out
cat /proc/asound/cards:
0 [default ]: USB-Audio - USB Audio CODEC
Burr-Brown from TI USB Audio CODEC at
usb-0000:00:04.2-2
Any other info that would help?
contents of /proc/asound/card0/stream0
What happens when you run "aplay something.wav"? Anything new from
dmesg?
Regards,
Clemens
10:51 p.m.
Mark Williams (MWP) wrote:
Burr-Brown from TI USB Audio CODEC at usb-0000:00:04.2-1 : USB Audio
Playback:
Status: Stop
Interface 1
Altset 1
Format: S16_LE
Channels: 2
Endpoint: 2 OUT (ADAPTIVE)
Rates: 32000, 44100, 48000
Interface 1
Altset 2
Format: S16_LE
Channels: 1
Endpoint: 2 OUT (ADAPTIVE)
Rates: 32000, 44100, 48000
Interface 1
Altset 3
Format: S8
Channels: 2
Endpoint: 2 OUT (ADAPTIVE)
Rates: 32000, 44100, 48000
Interface 1
Altset 4
Format: S8
Channels: 1
Endpoint: 2 OUT (ADAPTIVE)
Rates: 32000, 44100, 48000
Interface 1
Altset 5
Format: U8
Channels: 2
Endpoint: 2 OUT (ADAPTIVE)
Rates: 32000, 44100, 48000
Interface 1
Altset 6
Format: U8
Channels: 1
Endpoint: 2 OUT (ADAPTIVE)
Rates: 32000, 44100, 48000
Capture:
Status: Stop
Interface 2
Altset 1
Format: S16_LE
Channels: 2
Endpoint: 4 IN (ASYNC)
Rates: 48000
Interface 2
Altset 2
Format: S16_LE
Channels: 1
Endpoint: 4 IN (ASYNC)
Rates: 48000
Interface 2
Altset 3
Format: S16_LE
Channels: 2
Endpoint: 4 IN (ASYNC)
Rates: 44100
Interface 2
Altset 4
Format: S16_LE
Channels: 1
Endpoint: 4 IN (ASYNC)
Rates: 44100
Interface 2
Altset 5
Format: S16_LE
Channels: 2
Endpoint: 4 IN (ASYNC)
Rates: 32000
Interface 2
Altset 6
Format: S16_LE
Channels: 1
Endpoint: 4 IN (ASYNC)
Rates: 32000
Interface 2
Altset 7
Format: S16_LE
Channels: 2
Endpoint: 4 IN (ASYNC)
Rates: 22050
Interface 2
Altset 8
Format: S16_LE
Channels: 1
Endpoint: 4 IN (ASYNC)
Rates: 22050
Interface 2
Altset 9
Format: S16_LE
Channels: 2
Endpoint: 4 IN (ASYNC)
Rates: 16000
Interface 2
Altset 10
Format: S16_LE
Channels: 1
Endpoint: 4 IN (ASYNC)
Rates: 16000
Interface 2
Altset 11
Format: S8
Channels: 2
Endpoint: 4 IN (ASYNC)
Rates: 16000
Interface 2
Altset 12
Format: S8
Channels: 1
Endpoint: 4 IN (ASYNC)
Rates: 16000
Interface 2
Altset 13
Format: S8
Channels: 2
Endpoint: 4 IN (ASYNC)
Rates: 8000
Interface 2
Altset 14
Format: S8
Channels: 1
Endpoint: 4 IN (ASYNC)
Rates: 8000
Interface 2
Altset 15
Format: S16_LE
Channels: 2
Endpoint: 4 IN (SYNC)
Rates: 11025
Interface 2
Altset 16
Format: S16_LE
Channels: 1
Endpoint: 4 IN (SYNC)
Rates: 11025
Interface 2
Altset 17
Format: S8
Channels: 2
Endpoint: 4 IN (SYNC)
Rates: 11025
Interface 2
Altset 18
Format: S8
Channels: 1
Endpoint: 4 IN (SYNC)
Rates: 11025
USB support -> USB Audio support = off
Sound -> ALSA -> ALSA USB devices -> USB Audio/MIDI driver = on
On plugging in the device, dmesg says:
hub 1-0:1.0: new USB device on port 2, assigned address 2
drivers/usb/input/hid-core.c: ctrl urb status -75 received
usb 1-2: control timeout on ep0out
cat /proc/asound/cards:
0 [default ]: USB-Audio - USB Audio CODEC
Burr-Brown from TI USB Audio CODEC at
usb-0000:00:04.2-2
Any other info that would help?
contents of oproc/asound/card0/stream0 What happens when you run "aplay
something.wav"? Anything new from
dmesg?
On running aplay, dmesg lists "usb 1-1: control timeout on ep0in", and thats
it.
alsamixer also locks hard (kill -9 doesnt work).
The only way to recover is pull the USB cable, at which point alsamixer/aplay returns to
bash.
BTW, if the USB "soundcard" is plugged in on boot, booting fails (not sure where
yet).
Should i be asking about this on the linux-usb-devel mailinglist?
Thanks.
7450
days inactive
7451
days old
linux-audio-user@lists.linuxaudio.org
7 comments
3 participants
participants (3)
-
Clemens Ladisch -
Frank Barknecht -
Mark Williams (MWP)