12 May
2006
12 May
'06
8:36 p.m.
Hi there,
been lurking a while and reading and have run into this problem trying
to initialize my Multiface (ubuntu dapper)
hdsploader - firmware loader for RME Hammerfall DSP cards
Looking for HDSP + Multiface or Digiface cards :
Card 0 : NVidia CK804 with ALC850 at 0xd3103000, irq 225
Card 1 : RME Hammerfall DSP at 0xd3000000, irq 58
Upload firmware for card hw:1
Hwdep ioctl error on card hw:1 : Input/output error.
Card 2 : MPU-401 UART at 0x330, irq 10
and pardon my noobness where did Card 2 come from?
Thanks in advance
M
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
13 May
13 May
12:33 a.m.
On 5/12/06, Moon <saint_luna(a)yahoo.com> wrote:
Hi there,
been lurking a while and reading and have run into this problem trying
to initialize my Multiface (ubuntu dapper)
hdsploader - firmware loader for RME Hammerfall DSP cards
Looking for HDSP + Multiface or Digiface cards :
Card 0 : NVidia CK804 with ALC850 at 0xd3103000, irq 225
Card 1 : RME Hammerfall DSP at 0xd3000000, irq 58
Upload firmware for card hw:1
Hwdep ioctl error on card hw:1 : Input/output error.
Card 2 : MPU-401 UART at 0x330, irq 10
Make sure that the Multiface is plugged in to the card and powered
before booting. Sometimes, just doing a soft reboot after you get the
message above will resolve the problem.
But I don't have experience with ubuntu's alsa configuration, there
might be other issues.
jlc
12:23 p.m.
Moon <saint_luna(a)yahoo.com> writes:
Hwdep ioctl error on card hw:1 : Input/output error.
Can you try:
Unplug the power of the unit as well as the 1394 interface for some
seconds, then replug and run hdsploader.
--
Esben Stien is b0ef@e s a
http://www. s t n m
irc://irc. b - i . e/%23contact
[sip|iax]: e e
jid:b0ef@ n n
1:19 p.m.
On Sat, 2006-05-13 at 18:21 +0200, Esben Stien wrote:
Moon <saint_luna(a)yahoo.com> writes:
Is the firmware installed? Ubuntu does not supply it, you'll have to
install alsa-firmware from the ALSA site
Lee
Hwdep ioctl error on card hw:1 : Input/output
error.
Can you try:
Unplug the power of the unit as well as the 1394 interface for some
seconds, then replug and run hdsploader.
6582
days inactive
6583
days old
linux-audio-user@lists.linuxaudio.org
3 comments
4 participants
participants (4)
-
Esben Stien -
Jesse Chappell -
Lee Revell -
Moon