[linux-audio-user] question for Delta 1010 users

[Florin Andrei]

On Sat, 2005-02-26 at 08:44 +0000, Rob Fell wrote:
> Florin Andrei wrote:
> > I let the system running the whole day and, when i came back home this
> > evening, the power LED on the 1010 was turned off and the card was not
> > passing any signal in or out. The OS was seeing it, i was able to run
> > envy24control, but couldn't hear anything. Rebooting the system didn't
> > help.
> > After power-cycling the system, the card works fine again.
> 
> My uptimes are measured in weeks and I've not seen this issue.

Today i powered up the system and the LED on the 1010 didn't light up. I
pulled the 9 VAC cord out then plugged it in and the LED lighted up.

<sigh> I guess I'll send it back for a replacement.

> > Also, is your card running hot like mine does? (epecially the left-hand
> > side of the box)
> 
> Yes, but not so hot you can't touch it.  It's a well known Achilles-heel 
> of the delta 1010.

Right, it's hot but not so i can't touch it.

-- 
Florin Andrei

http://florin.myip.org/