[Jack-Devel] netJACK2 with two nodes

[Tweed]

On 08/15/16 14:11, xan wrote:
> Hi,
>
> after some weeks of silence, I got back to this issue. I installed zita-njbridge on both my machines, started the JACK server and tried to run the commands.
>
> 'zita-j2n b`s-ip port' is running on A and 'zita-n2j a`s-ip port' is running on B.
> However, I don`t know the port I`m supposed to use and I couldn` find out.
>
> The command seems to run on A but fails on B: "Failed to connect to socket. Cannot assign request address."
>
> I`d appreciate some debugging here.
>
> Thanks in advance,
> xan.
>
> Am 19.07.2016 um 07:13 schrieb Athanasios Silis:
>> Hi Fons,
>> i'm not implying there was something wrong with zita-*2*, i'm sure in fact it is some network issue that caused the jitter from the speakers, it was nonetheless a jitter.
>> Now where zita-*2* offered jitter ,alsa_* did not , provided the same arguments where used (ie for low latency).
>>
>> I am sure had I spend more time on it I would have found a solution - i do not question zita-* is "future" while alsa_* is "obsolete", but for the given transition to zita-* , I had to revert to alsa_*
>>
>> On Thu, Jul 14, 2016 at 8:53 PM, Fons Adriaensen <fons at linuxaudio.org <mailto:fons at linuxaudio.org>> wrote:
>>
>>      On Thu, Jul 14, 2016 at 04:32:29PM +0300, Athanasios Silis wrote:
>>
>>      > in a similar setup zita* stuff has not worked great for me - I got alot of
>>      > noise , so I switched to using the more primitive alsa_in and alsa_out.
>>
>>      There a many ways a link using zita-*2* can go wrong, depending on
>>      network performance and if your Jack systems by themselves are OK
>>      or not. But 'noise' is not one of the possible results.
>>
>>      --
>>      FA
>>
>>      A world of exhaustive, reliable metadata would be an utopia.
>>      It's also a pipe-dream, founded on self-delusion, nerd hubris
>>      and hysterically inflated market opportunities. (Cory Doctorow)
>>
>>      _______________________________________________
>>      Jack-Devel mailing list
>>      Jack-Devel at lists.jackaudio.org <mailto:Jack-Devel at lists.jackaudio.org>
>>      http://lists.jackaudio.org/listinfo.cgi/jack-devel-jackaudio.org
>>
>>
>>
>>
>> _______________________________________________
>> Jack-Devel mailing list
>> Jack-Devel at lists.jackaudio.org
>> http://lists.jackaudio.org/listinfo.cgi/jack-devel-jackaudio.org
>
> _______________________________________________
> Jack-Devel mailing list
> Jack-Devel at lists.jackaudio.org
> http://lists.jackaudio.org/listinfo.cgi/jack-devel-jackaudio.org

b should also have b's ip.   i use ports in the 46xx range - not sure 
why. it works.

-- 
www.the-temp-agency.com/lollipop-factory

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.linuxaudio.org/archives/jackaudio/attachments/20160815/9b0f8441/attachment.html>