[linux-audio-dev] Re: [Alsamodular-devel] ams compile issues [was: qsynth configurescript fails on debian [qt]]

[Eric Dantan Rzewnicki]

Matthias,

Thank you. It works now.

ams is very cool. :)

-Eric Rz.

Matthias Nagorni wrote:
> 
> Hello Eric,
> 
> this is a known problem with ALSA 1.0 incompatibility. Has been fixed in
> CVS. Solution (from an earlier posing on this list):
> 
> > Just make the beginning of alsa_driver.h look like this:
> >
> > #ifndef __ALSA_DRIVER_H
> > #define __ALSA_DRIVER_H
> >
> > #define ALSA_PCM_OLD_HW_PARAMS_API   /* <-- These are the lines */
> > #define ALSA_PCM_OLD_SW_PARAMS_API   /* <-- you need to paste in*/
> >
> > #include <alsa/asoundlib.h>
> 
> Matthias
> 
> On Sat, 3 Jan 2004, Eric Dantan Rzewnicki wrote:
> 
> > I found and installed libqt3-compat-headers. The compile got much
> > further this time, but still no joy. There are a lot of compiler
> > warnings and errors. The errors would seem to indicate I'm using an
> > incompatible alsa version (or ams' alsa support is outdated ... ) I'm
> > working with the most recent tarball of ams-1.7.1 from sourceforge.
> >
> > My current settup: (tail end of compiler errors below)
> > PII 400 768MB
> > 6GB / /dev/hda2
> > 60GB /mnt/audio/ /dev/hdc1
> > drives tuned
> > 128MB swap /dev/hda1
> > M-Audio Delta-66 w/omni i/o
> >
> > debian testing (sarge)
> > 2.4.22-box1-pell-1
> > alsa-1.0.0rc2
> >     ./configure --with-isapnp=no --with-sequencer=yes --with-oss=no \
> >     --with-cards=dummy,virmidi,serial-u16550,mpu401,ice1712,ymfpci
> > libsndfile-1.0.5
> >     from tar.gz. debian only had 1.0.4
> > jack-0.91.1
> >     ./configure --enable-optimize --with-default-tmpdir=/mnt/ramfs/
> > --disable-portaudio
> > ecasound-2.3.2
> >     ./configure --enable-pyecasound --disable-oss --disable-arts
> >
> >
> > /usr/include/alsa/pcm.h:604: error: too few arguments to function `int
> >    snd_pcm_hw_params_get_periods(const snd_pcm_hw_params_t*, unsigned
> > int*,
> >    int*)'
> > alsa_driver.cc:150: error: at this point in file
> > /usr/include/alsa/pcm.h:539: error: too few arguments to function `int
> >    snd_pcm_hw_params_get_format(const snd_pcm_hw_params_t*,
> > snd_pcm_format_t*)'
> > alsa_driver.cc:151: error: at this point in file
> > /usr/include/alsa/pcm.h:531: error: too few arguments to function `int
> >    snd_pcm_hw_params_get_access(const snd_pcm_hw_params_t*,
> > snd_pcm_access_t*)'
> > alsa_driver.cc:152: error: at this point in file
> > alsa_driver.cc:157: error: invalid conversion from `int*' to `
> >    snd_pcm_uframes_t*'
> > /usr/include/alsa/pcm.h:591: error: too few arguments to function `int
> >    snd_pcm_hw_params_get_period_size(const snd_pcm_hw_params_t*,
> >    snd_pcm_uframes_t*, int*)'
> > alsa_driver.cc:157: error: at this point in file
> > alsa_driver.cc:157: warning: comparison between signed and unsigned
> > integer
> >    expressions
> > alsa_driver.cc:165: error: invalid conversion from `int*' to `unsigned
> > int*'
> > /usr/include/alsa/pcm.h:604: error: too few arguments to function `int
> >    snd_pcm_hw_params_get_periods(const snd_pcm_hw_params_t*, unsigned
> > int*,
> >    int*)'
> > alsa_driver.cc:165: error: at this point in file
> > alsa_driver.cc:165: warning: comparison between signed and unsigned
> > integer
> >    expressions
> > /usr/include/alsa/pcm.h:539: error: too few arguments to function `int
> >    snd_pcm_hw_params_get_format(const snd_pcm_hw_params_t*,
> > snd_pcm_format_t*)'
> > alsa_driver.cc:170: error: at this point in file
> > /usr/include/alsa/pcm.h:531: error: too few arguments to function `int
> >    snd_pcm_hw_params_get_access(const snd_pcm_hw_params_t*,
> > snd_pcm_access_t*)'
> > alsa_driver.cc:175: error: at this point in file
> > alsa_driver.cc:183: error: invalid conversion from `int*' to `unsigned
> > int*'
> > /usr/include/alsa/pcm.h:604: error: too few arguments to function `int
> >    snd_pcm_hw_params_get_periods(const snd_pcm_hw_params_t*, unsigned
> > int*,
> >    int*)'
> > alsa_driver.cc:183: error: at this point in file
> > /usr/include/alsa/pcm.h:539: error: too few arguments to function `int
> >    snd_pcm_hw_params_get_format(const snd_pcm_hw_params_t*,
> > snd_pcm_format_t*)'
> > alsa_driver.cc:184: error: at this point in file
> > /usr/include/alsa/pcm.h:531: error: too few arguments to function `int
> >    snd_pcm_hw_params_get_access(const snd_pcm_hw_params_t*,
> > snd_pcm_access_t*)'
> > alsa_driver.cc:185: error: at this point in file
> > alsa_driver.cc: In member function `int Alsa_driver::pcm_start()':
> > alsa_driver.cc:304: warning: comparison between signed and unsigned
> > integer
> >    expressions
> > alsa_driver.cc: In member function `int
> > Alsa_driver::set_hwpar(snd_pcm_t*,
> >    snd_pcm_hw_params_t*, int*)':
> > alsa_driver.cc:547: error: invalid conversion from `long unsigned int'
> > to `
> >    unsigned int*'
> > /usr/include/alsa/pcm.h:557: error: too few arguments to function `int
> >    snd_pcm_hw_params_get_channels_max(const snd_pcm_hw_params_t*,
> > unsigned
> >    int*)'
> > alsa_driver.cc:553: error: at this point in file
> > make: *** [alsa_driver.o] Error 1
> >
> >
> >
> > Frank Barknecht wrote:
> > >
> > > Hallo,
> > > Eric Dantan Rzewnicki hat gesagt: // Eric Dantan Rzewnicki wrote:
> > >
> > > > Well ... no luck. The compile will start, but fails with a lot of errors
> > > > -- see below ... I'm sending this to the alsamodular-devel list as well,
> > > > but that list seems to be pretty much inactive (only 6 posts in past 5
> > > > months). I've heard great things about this synth, but have thus far
> > > > been unable to hear it for myself.
> > > >
> > > > Eric Dantan Rzewnicki wrote:
> > > > > When I get home I'll try this on my debian testing (sarge) audio box and
> > > > > see how far I get. Thanks.
> > > > >
> > > > > -Eric Rz.
> > > >
> > > > /usr/share/qt3/doc/html/qlist.html is the only file on my system that
> > > > comes up in a locate qlist ... it says:
> > > > "QList Class Reference (obsolete)
> > > > #include <qlist.h>
> > > > The QList class has been renamed QPtrList in Qt 3.0. "
> > >
> > > Hah, I stumbled over that on Debian, too, but I did find a solution.
> > > You're missing some old headers that aren't anymore in recent QTs
> > > unless you install a package that in D. unstable now is called
> > > libqt3-compat-headers.
> > >
> > > But IIRC it was named slightly else on older Debians, although very
> > > similar. Maybe qt3-compat? I'm not sure right now.
> > >
> > > ciao
> > > --
> > >  Frank Barknecht                               _ ______footils.org__
> >
> >
> > -------------------------------------------------------
> > This SF.net email is sponsored by: IBM Linux Tutorials.
> > Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
> > Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
> > Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
> > _______________________________________________
> > Alsamodular-devel mailing list
> > Alsamodular-devel at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/alsamodular-devel
> >
> 
> --
> Dr. Matthias Nagorni
> SuSE Linux AG
> Maxfeldstr. 5             phone: +49 911 74053375
> D - 90409 Nuernberg       fax  : +49 911 74053483