[linux-audio-user] Re: RME hammerfall DSP Multiface: help needed
Thomas Charbonnel
thomas at undata.org
Mon Sep 8 03:11:01 EDT 2003
(...)
Lsmod and modules.conf do not show any problem to me.
>
>> 3) Run hdspmixer and see what signals you see when running audio
>> through it. alsaplayer is fine for this purpose.
>
> All the meters in the middle row show activity.
>
> BTW: Alsaplayer says 'Failed to load output plugin "alsa". Trying
> defaults"
> Is this a hint?
>
You are most certainly playing a mono signal through the OSS emulation
layer. With hdspmixer preset 1, you should have signal coming out of all
the physical outputs, and also a VERY LOUD signal on the line outs, as all
the playback channels are routed to the line outs and thus summed up.
How is the card wired up ?
Do the meters show signal going through the outputs (3rd hdspmixer row) ?
As a side not, if you want to use alsaplayer with the alsa, you must use
the plughw interface :
alsaplayer -o alsa -d plughw:0
>
>> 4) Run hdspconf and look at the way you have clocks set up. (I think
>> this will work for your hardware, but I'm not sure.)
>
> Oh, I hadn't noticed this program yet (It is not in alsa-tools 0.9.6)
> Looks very handy! It shows:
>
> Pref Sync Ref ADAT1 in
> SyncCheck all say 'No Lock'
> SPDIF In internal
> SPDIF Out nothing selected
> SPDIF Freq. --
> Sample Clock Source 44.1
> Auto Sync Ref Input --
> Freq. --
> System Clock Mode Master
> Freq. 44.1
>
>
This looks good to me.
Thomas
More information about the Linux-audio-user
mailing list