[linux-audio-user] RME Cardbus + multiface

Miha Tomsic miha.tomsic at guest.arnes.si
Sun Jan 11 15:19:17 EST 2004


	Hello Mark and others!

On ned, 2004-01-11 at 18:53, Mark Knecht wrote:
> > 02:00.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev
> > 01)
> > 	Subsystem: Acer Incorporated [ALI]: Unknown device 0019
> > 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > Stepping+ SERR- FastB2B-
> > 	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
> > <MAbort- >SERR- <PERR-
> > 	Latency: 168
> > 	Interrupt: pin A routed to IRQ 5
> > 	Region 0: Memory at 20000000 (32-bit, non-prefetchable) [size=4K]
> > 	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
> > 	Memory window 0: 20400000-207ff000 (prefetchable)
> > 	Memory window 1: 20800000-20bff000
> > 	I/O window 0: 00004400-000044ff
> > 	I/O window 1: 00004800-000048ff
> > 	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
> > 	16-bit legacy interface ports at 0001
> > 
> > 02:00.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev
> > 01)
> > 	Subsystem: Acer Incorporated [ALI]: Unknown device 0019
> > 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > Stepping+ SERR- FastB2B-
> > 	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
> > <MAbort- >SERR- <PERR-
> > 	Latency: 168
> > 	Interrupt: pin B routed to IRQ 11
> > 	Region 0: Memory at 20001000 (32-bit, non-prefetchable) [size=4K]
> > 	Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
> > 	Memory window 0: 20c00000-20fff000 (prefetchable)
> > 	Memory window 1: 21000000-213ff000
> > 	I/O window 0: 00004c00-00004cff
> > 	I/O window 1: 00005000-000050ff
> > 	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
> > 	16-bit legacy interface ports at 0001
> BTW - I have a friend who designs cardbus controllers for O2 Micro, so I
> can ask questions from the inside if we need some specific information.

I am planing on getting Acer Travelmate 803Lci which uses the O2 Micro
CardBus controller.

-----------
02:06.0 CardBus bridge: O2 Micro, Inc.: Unknown device 7114 (rev 20) 
02:06.1 CardBus bridge: O2 Micro, Inc.: Unknown device 7114 (rev 20)
-----------

This is a snippet from lspci output from 803Lci I found on the net
(different sites have very similar outputs). 

It looks that O2 Micro controllers in general add quite some latency and
should be avoided for professional audio as RME and Derek have pointed
out.

But are all O2 Micro controllers equally "bad"? Do we have any coment
from your frined or any other user of Acer?

The device found in 803Lci should be O2 MICRO Inc. OZ711M1 according to
the document http://www.tssc.de/download/docs/listofsupporteddevices.htm
(cached by google).

Thanks and take care,

	Miha...




More information about the Linux-audio-user mailing list