[linux-audio-user] Midisport 8x8 - firmware not loading; is my guess

Matthew Allen mtallen at gmail.com
Mon Nov 15 19:19:00 EST 2004

I will try it tonight with my new machine, but I had the 8x8 working
on an older machine using CCRMA for rh9. Its been a while since I have
booted that machine, but I know it was working (if that was a worry
for you)

I do remeber that it had to be plugged in and turned on before the
machine booted

On Mon, 15 Nov 2004 15:05:07 -0800, Brad Fuller <brad at sonaural.com> wrote:
> Marije Baalman wrote:
> >Hi,
> >
> >FWIW:
> >I have a similar problem with the 2x2:
> >when I connect the device, it shortly shows up in lsusb, then the leds
> >on the device all blink once, and then it does not show up anymore in
> >lsusb.
> >Other usb devices work fine.
> >The MidiSport 2x2 works fine after a reboot, while the MidiSport 2x2
> >is still plugged in; it then immediately gives the nice burning
> >USB-led sign that it is allright, even before I start booting Linux.
> >
> >
> Thanks for the input. I tried different configurations (rebooting with
> it plugged in, out... etc.) Unfortunately, my 8x8 does not behave like
> your 2x2.  At this point, I'm stumped. I'm wondering if it's a hardware
> issues -- perhaps the voltage is just under a certain threshold.
> brad

More information about the Linux-audio-user mailing list