[linux-audio-user] Alsa problems with nforce2 (Solved)

[Leandro Monk]

I edit /etc/discover.conf and put disable the modules of OSS and
Voila!!!!


El mar, 21-09-2004 a las 18:56, Leandro Monk escribió:
> I use Knoppix 3.3 whit alsa parameter and load succefuly whit
> snd-intel8x0 module
> 
> El mar, 21-09-2004 a las 18:45, Leandro Monk escribió:
> > El mar, 21-09-2004 a las 21:41, bryce escribió:
> > > I have to start with this question, is the sound card attached to the 
> > > motherboard?
> > > 
> > yes, is onboard device
> > 
> > > Peronally i don't believe that the nvidia2 chipset was packaged with an 
> > > intel sound card (i could be wrong here, i've never used that chipset). 
> > > A good way to detect the sound card would be to boot up with a knoppix 
> > > CD and see what it finds( i use that on all foriegn hardware computers 
> > > so i know what i'm dealing with).
> > I try
> > 
> > > 
> > > If i'm totally wrong, and you do have an intel sound card, please feel 
> > > free to tar & feather me... i've earned it.
> > > 
> > all i have read about this card say:
> > 
> > nforce2 is intel compilant
> > 
> > > bryce
> > > 
> > thanks...
> > 
> > > Leandro Monk wrote:
> > > > Hi:
> > > > 
> > > > I 've try to use the alsa driver for my nforce2... when i try load the
> > > > module snd-intel8x0, the system say me:
> > > > 
> > > > /lib/modules/2.4.26-1-386/alsa/snd-intel8x0.o: init_module: No such
> > > > device
> > > > Hint: insmod errors can be caused by incorrect module parameters,
> > > > including invalid IO or IRQ parameters.
> > > >       You may find more information in syslog or the output from dmesg
> > > > /lib/modules/2.4.26-1-386/alsa/snd-intel8x0.o: insmod
> > > > /lib/modules/2.4.26-1-386/alsa/snd-intel8x0.o failed
> > > > /lib/modules/2.4.26-1-386/alsa/snd-intel8x0.o: insmod snd-intel8x0
> > > > failed
> > > > 
> > > > My /proc/pci is:
> > > > 
> > > >    Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio
> > > > Controler (MCP) (rev 161).
> > > >       IRQ 5.
> > > >       Master Capable.  No bursts.  Min Gnt=2.Max Lat=5.
> > > >       I/O at 0xd800 [0xd8ff].
> > > >       I/O at 0xdc00 [0xdc7f].
> > > >       Non-prefetchable 32 bit memory at 0xec002000 [0xec002fff].
> > > >   Bus  0, device   8, function  0:
> > > > 
> > > > I use Debian sarge, and instal this packages:
> > > > 
> > > > alsa-base, alsa-modules, alsa-utils. alsa-lib
> > > > 
> > > > ¿Any idea to fix this problem?
> > > > 
> > 
>