[linux-audio-user] midisport 2x2

[svoufff]

I've done that already, it works if i unplug then replug the interface, but
it's still not powered up after a machine start.Nothing in dmesg either.All
the files are there but nothing happens.
On the usb port next to this one , i have a Iriver player connected and it
works perfect, but no way to fire up the 2x2.
Thanks anyway for the help.


> Firmware has to be loaded into the Midisport 2x2 for it to operate.  In
> Windows this is done by whatever software was installed for this device,
> and in Linux hotplug calls fxload to do the same.
>
> The whole story and firmware are available under
> ezusbmidi_2002_11_17.noarch.rpm or whatever other format you need.
>
> With Fedora Core 3 running on 2.6.11-1.27FC3smp the 2x2 fires right up
> when plugged in or if already plugged, at bootup.  Fxload is already
> present in /sbin, two files (loader instructions and devices map) go in
> /etc/hotplug/usb, and two firmware files go in /usr/share/usb/ezusbmidi
> - it's just that simple.
>
> Frank
>
>