[linux-audio-user] Recording ADAT inputs on RME hammerfall 9636/52

[Stephen Cameron]

Mark Krecht wrote:

[snip]
> BTW - You can always take the ADAT cable and connected it from the
> output back to an input, send audio out and then see if you can record
> audio coming back in. It's a simple test to make sure the
> Alsa/Hammerfall set up is actually working. If that fails the problem
> is in your Linux setup, or the ADAT cables. If it works then it's
> either in the mixer or an interface problem where the mixer and the
> Hammerfall are not somehow compatible. (Or how you've configured your
> mixer I suppose....

Oh, now that's a good idea.  I can probably do the same 
on the AW as well.  Thanks.  

I found jackbitscope here, btw: 
http://www.ecs.soton.ac.uk/~njl98r/code/ladspa/bitscope/
Thanks for that...

I'll post what I find out tonight.

-- steve


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com