[LAU] freebob and fedora 9 CCRMA

[Pieter Palmers]

Hartmut Noack wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> Hello,
> 
> I have a multitude of issues with freebob on several computers/distros.
> Here I only want to ask for help with FC9 plus CCRMA:
> 
> I have a VIA-FW-Controller on a PCI-Card in a AMD64-box. Connecting my
> Presonus Firebox to this sometimes works flawlessly and I had sessions
> for several hours in 64Studio 2.1 on this box.
> 
> But alas: in 4 out of 5 cases the box does not invoke the ieee1395:
> raw1394 raw device initialisation.
> tail -f /var/log/messages shows up stuff like "recieved ... during reset
> ignoring" and does nothing.
> 
> On FC9 with CCRMA-Kernel the best it does is:
> "Error parsing configrom for node 0-00:1023"
> 
> Then I get the beloved message:
> 
> "ieee1394: raw1394: /dev/raw1394 device initialized"
> 
> BUT: only /dev/raw1394 exists, ieee1394 does not. Thus jackd dies as
> freebob tries to initialize the driver backend.
> 
> I noticed also, that a dv1394 Device is created, which I have not seen
> for some time now...
> 
> Please consider to unlist the following causes for that:
> 
> 1.) permissions: all is set properly I have good success with the same
> setup in 64Studio
> 
> 2.) presonus-trouble: the box works OK (see above) I tried it both
> host-powered and with the power-supply attached to the box...

What error message does freebob give?

Can you post the output of "lsmod"?

Greets,

Pieter