[LAU] Unable to launch jack with a FA-66

[simone-www.io-lab.org]

On Wed, Sep 24, 2008 at 11:34 AM, Pieter Palmers <pieterp at joow.be> wrote:
> Arnold Krille wrote:
>> Am Mittwoch, 24. September 2008 schrieb simone-www.io-lab.org:
>>> thank you for your interest in this desperate case ;)
>>> yes everything is connected and powered on as supposed to be
>>> the only thing i come to think about is: i am using a PCMCIA card
>>> which has 3 ports but in Jack i don t have nay ohter choise than hw:0
>>> , that may be the symptom of an unrecognized device?
>>
>> If your fw-card has three ports, there are two possibilities:
>> a) pass hw:X with X in {0,1,2} in the jackd-commandline
> note that the number of ports has nothing to do with the hw:x parameter.
> the hw:x parameter designates the controller to use. All ports on one
> controller are part of the same bus, and are treated the same.
>
> if you have a built-in controller, you might have to use hw:1.
>
> Greets,
>
> Pieter
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user at lists.linuxaudio.org
> http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
>
so far:
i can t find gscanbus on the Fedora repos, but in Ubuntu i have it
installed and jack/fa-66 give me the very same problems and in Ubuntu
i can see the device.




-- 
.wmv , .wma , .pps along with all proprietary Windows formats won t be
accepted and/or viewed....