[LAU] bristol synths hang

[Nick Copeland]

> From: rennabh at gmail.com
>
> I have version 0.60.7

That is a bit unfortunate....

> Jack is running on laptop built-in audio card with:
> /usr/bin/jackd -r -t2000 -dalsa -dhw:0 -r44100 -p2048 -n2 -Xseq

I will test with a similar set of options. Out of interest, do you configure
your CPU for performance or on-demand? It should not make any 
difference here except that on-demand is likely to give you more
overruns with note events.

> I found the hanged note stops if I change the midi channel in bristol.

Bristol will execute an all-notes-off when the emulator MIDI channel 
changes so the notes probably are finally off. It still looks like you have
another issue though. Now bristol-0.60.8 has some changes for running
with things like low speed CPU (speedstepping), large period sizes and
for things like '-voices 1' or '-nnp' that could still give clicks, pops and
sticky notes. Shouldn't affect the polyphonics though. A copy of your
bristol-0.60.7/config.log might also be useful plus the commandline
you use for bristol too.

Regards, nick.
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxaudio.org/pipermail/linux-audio-user/attachments/20101212/fae66d5d/attachment.htm>