[LAU] bristol synths hang

[alex stone]

On Sun, Dec 12, 2010 at 3:36 PM, Nick Copeland
<nickycopeland at hotmail.com> wrote:
> The AKS is non functional, it is documented somewhere on the website but I
> will consider adding a big capital letter disclaimer for the few that are
> unfinished. If you start it with -libtest you can just see the GUI, I use
> that during development.
>
> The Rhodes is the DX algorithm with a preset. Will have a look at it here.
> Bristol is not going to be the best Rhodes you will find on open source,
> It's not even the best Rhodes emulator in bristol! some soundfonts and most
> samples will give you better results.
>
> Regards, nick
>
>> From: compose59 at gmail.com
>> Date: Sun, 12 Dec 2010 14:17:41 +0300
>> Subject: Re: [LAU] bristol synths hang
>> To: nickycopeland at hotmail.com
>> CC: rennabh at gmail.com; linux-audio-user at lists.linuxaudio.org
>>
>> On Sun, Dec 12, 2010 at 12:56 PM, alex stone <compose59 at gmail.com> wrote:
>> > Nick, just updated to 0.60.7 (Gentoo Ebuild), added your suggested cli
>> > options to a bristolrc, and all is good so far.
>> >
>> > Gentoo 64bit, 2.6.33.7-RT.
>> >
>> > Regards,
>> >
>> > Alex.
>> >
>> > --
>> > www.openoctave.org
>> >
>> > midi-subscribe at openoctave.org
>> > development-subscribe at openoctave.org
>> >
>>
>> Nick, been through the synths, and only 2 seem to be a bit problematic, so
>> far.
>> aks- opens, but no jack or alsa ports appear, and it zombifies shortly
>> after that.
>> rhodes- opens, and is playable, but runs CPU up to 100 percent, and
>> hangs, which then needs to be killed off in a terminal.
>>
>> Alex.
>>
>> --
>> www.openoctave.org
>>
>> midi-subscribe at openoctave.org
>> development-subscribe at openoctave.org
>

Nick, np. I'll refrain from reporting anymore until you announce an
update, and we can test finished code.

Apologies for the noise.

Regards,

Alex.

-- 
www.openoctave.org

midi-subscribe at openoctave.org
development-subscribe at openoctave.org