[LAU] oh yoshimi, one more time

[cal]

david wrote:
> cal wrote:
>> david wrote:
>>> [ ... ]
>>>>> @audio          hard    rtprio          50
>>>>> @audio          soft    rtprio          30
>>>> These are rather low. I just looked, and yoshi tries for 55, so these settings
>>>> would fail. You could either bump those settings higher, or adjust the value
>>>> in MusicIO.cpp line 214 down to your level and see if that helps.
>>> I'll boost mine up to go with toshi. It was a copy/paste from someone 
>>> else's recommendation.
>> I still get the feeling you're inclined to set them lower than what's
>> consider normal or recommended. The Jack FAQ spells it out pretty
>> simply - <http://www.jackaudio.org/faq>.
> 
> Thanks. I changed the hard one to 99. The JACK FAQ didn't say anything 
> about the difference between "hard" and "soft", so I set the "soft" one 
> to 55. Can't test it right now, will test it later!
> 
Almost, but not quite. Somewhere in limits.conf it describes (perhaps cryptically)
how you can set hard and soft at the same time (on the same line) using the '-'.
I don't know of any reason to have hard and soft set different, so as per the jack
faq is about as good as you can get.

cheers.